Bibliography


Abraham, B. and Whitney, J.B. ( May 1990 ). Applications of EWMA charts to data from continuous processes, in 44th ASQC Annual Quality Congress Transactions , San Francisco, CA, pp. 813 “818.

Aerne, L.A., Champ, C.W., and Rigdon, S.E. ( 1991 ). Evaluation of control charts under linear trends, Communications in Statistics ” Theory and Methods , 20 (10), pp. 3341 “3349.

AIAG. ( 1991 ). Fundamental Statistical Process Control: Reference Manual, Automotive Industry Action Group , Southfield, MI, p. 80.

Ailor, R.B., Schmidt, J.W., and Bennett, G.K. ( 1975 ). The design of economic acceptance sampling plans for a mixture of attributes and variables , ARE Transactions , Vol. 7.

Alt, F.B. ( May 1982 ). Multivariate quality control: state of the art, in 36th ASQC Annual Quality Congress Transactions , pp. 886 “893.

Alt, F.B. ( 1985 ). Multivariate quality control, in Encyclopedia of Statistical Sciences , Vol. 6, Kotz, S. and Johnson, N., Eds., John Wiley & Sons, New York, pp. 110 “122.

Alt, F.B. and Bedewi, G.E. ( May 1986 ). SPC of dispersion for multivariate data, in 40th ASQC Annual Quality Congress Transactions , Anaheim, CA, pp. 248 “254.

Alwan, L.C. ( 1991 “1992 ). Autocorrelation: fixed versus variable control limits, Quality Engineering , 4 (2), pp. 167 “188.

Alwan, L.C. and Roberts, H.V. ( January 1988 ). Time-series modeling for statistical process control, Journal of Business & Economic Statistics , 6 (1), pp. 87 “95.

Anderson, T.W. ( 1971 ). The Statistical Analysis of Time Series , John Wiley & Sons, New York.

Arcelus, F.J. and Banerjee, P.K. ( November 1985 ). Selection of the most economical production plan in a tool wear process, Technometrics , 27 (4), pp. 433 “437.

Arcelus, F.J. and Banerjee, P.K. ( 1987 ). Optimal economical production plan in a tool wear process with rewards for acceptable, undersized and oversized parts , Engineering Costs and Production Economics , 11, pp. 13 “19.

Aroian, L. and Levine, H. ( 1950 ). The effectiveness of quality control charts, Journal of the American Statistical Association , Vol. 44.

Baker, K.R. ( 1971 ). Two process models in the economic design of an x chart, AIIE Transactions , Vol. 3.

Barnard, G.A. ( 1959 ). Control charts and stochastic processes, Journal of the Royal Statistical Society (B) , Vol. 21.

Bather, J.A. ( 1963 ). Control charts and the minimization of costs, Journal of the Royal Statistical Society (B) , Vol. 25.

Bender, A. ( December 1962 ). Bendarizing tolerances ” a simple practical probability method of handling tolerances for limit-stack-ups, Graphic Science , pp. 17 “21.

Bender, A. ( May 1968 ). Statistical Tolerancing as It Relates to Quality Control and the Designer, SAE Paper No. 680490, Society of Automotive Engineers, Southfield, MI.

Bingham, C. and Nelson, L.S. ( August 1981 ). An approximation for the distribution of the von Neumann ratio, Technometrics , 23 (3), pp. 285 “288.

Bisgaard, S., Hunter, W.G., and Pallesen, L. ( 1984 ). Economic selection of quality of manufactured product, Technometrics , Vol. 26.

Bissell, D. ( 1994 ). Statistical Methods for SPC and TQM , Chapman & Hall, London.

Bolton, M. ( 1987 ). GAGE.BAS: A Short Term Measurement Variability Analysis Program, Supplier Quality Assistance, Electronics Division, Ford Motor Company, Rawsonville, MI.

Bothe, D.R. ( March 1985 ). The group control chart, Quality , 24 (3), pp. 53 “54.

Bothe, D.R. ( May 1989 ). A powerful new control chart for job shops , in 43rd ASQC Annual Quality Congress Transactions , Toronto, Canada, pp. 265 “270.

Bothe, D.R. ( 1989 ). SPC for Short Production Runs , International Quality Institute, Inc., Cedarburg, WI.

Bothe, D.R. ( May 1990 ). A chart for monitoring within-piece variation, in 44th ASQC Annual Quality Congress Transactions , San Francisco, CA, pp. 899 “904.

Bothe, D.R. ( 1991 ). SPC for Short Production Runs Handbook , International Quality Institute, Inc., Cedarburg, WI.

Bothe, D.R. ( 1991 ). SPC for Short Runs & JIT , International Quality Institute, Inc., Sacramento, CA, pp. D-47 to D-53.

Bothe, D.R. ( May 1992 ). A capability study for an entire product, in 46th ASQC Annual Quality Congress Transactions , Nashville, TN, pp. 172 “178.

Bothe, D.R. ( 1993 ). Measuring Process Capability Training Manual , International Quality Institute, Inc., Sacramento, CA, pp. K-2 to K-S.

Bothe, D.R. ( 1993 ). Reducing Process Variation , International Quality Institute, Inc., Sacramento, CA.

Bowker, A.H. and Lieberman, G.J. ( 1972 ). Engineering Statistics , 2nd ed., Prentice-Hall, Englewood Cliffs, NJ.

Box, G.E.P. ( 1957 ). Evolutionary operation: a method for increasing industrial productivity, Applied Statistics , Vol. 6.

Box, G.E.P. ( 1991 “1992 ). Bounded adjustment charts, Quality Engineering , 4 (2), pp. 331 “338.

Box, G.E.P. and Draper, N.R. ( 1969 ). Evolutionary Operation , John Wiley & Sons, New York.

Box, G.E.P. and Jenkins, G.M. ( 1976 ). Time Series Analysis, Forecasting, and Control , 2nd ed., Holden-Day, San Francisco, CA.

Boyd, D.F. ( November 1950 ). The group chart, Industrial Quality Control .

Boyles, R.A. ( January 1996 ). Exploratory capability analysis, Journal of Quality Technology , 28 (1), pp. 91 “98.

Burr, I.J. ( 1967 ). The effect of nonnormality on constants for x and R charts, Industrial Quality Control , Vol. 23.

Burr, J.T. ( May 1989 ). SPC in the short run, in 43rd ASQC Annual Quality Congress Transactions , Toronto, Canada, pp. 776 “780.

Campanella, J., Ed. ( 1990 ). Principles of Quality Costs: Principles, Implementation, and Use , 2nd ed., Quality Press, Milwaukee, WI.

Carangelo, R.M. ( January 1995 ). Clearly illustrate multiple measures with the web chart, Quality Progress , 28 (1), p. 136.

Case, K.E., Schmidt, J.W., and Bennett, G.K. ( 1975 ). Discrete economic multiattribute acceptance sampling, AIIE Transactions , Vol. 7.

Chan, L.K., Cheng, S.W., and Spiring, F.A. ( 1991 ). A multivariate measure of process capability, International Journal of Modelling and Simulation , 11, pp. 1 “6.

Chen, H. ( 1994 ). A multivariate process capability index over a rectangular solid tolerance zone, Statistica Sinica , 4, pp. 749 “758.

Chiu, W.K. ( 1973 ). Comments on the economic design of x-charts, Journal of the American Statistical Association , Vol. 68.

Chiu, W.K. ( 1974 ). The economic design of cusum charts for controlling normal means, Applied Statistics , Vol. 23.

Chiu, W.K. ( 1975 ). Economic design of attribute control charts, Technometrics , Vol. 17.

Chiu, W.K. ( 1976 ). Economic design of np-charts for processes subject to a multiplicity of assignable causes, Management Science , Vol. 23.

Chiu, W.K. ( 1976 ). On the estimation of data parameters for economic optimum X-charts, Metrika , Vol. 23.

Chiu, W.K. and Cheung, K.C. ( 1977 ). An economic study of x-charts with warning limits, Journal of Quality Technology , Vol. 9.

Chiu, W.K. and Wetherill, G.B. ( 1974 ). a simplified scheme for the economic design of x-charts, Journal of Quality Technology , Vol. 6.

Chiu, W.K. and Wetherill, G.B. ( 1975 ). Quality control practices, International Journal of Production Research , Vol. 13.

Clements, J.A. ( September 1989 ). Process capability calculations for non-normal distributions, Quality Progress , 22 (9), pp. 95 “100.

Clements, R.B. ( 1991 ). Handbook of Statistical Methods in Manufacturing , Prentice-Hall, Englewood Cliffs, NJ, pp. 60 “62.

Cochran, W.G. ( 1954 ). Some methods for strengthening the common x 2 tests, Biometrics , 10, pp. 47 “52.

Constable, G.K. and Hobbs, J.R. ( May 1992 ). Small samples and non-normal capability, in 46th ASQC Annual Quality Congress Transactions , Nashville, TN, pp. 37 “43.

Cowden, D.J. ( 1957 ). Statistical Methods in Quality Control , Prentice-Hall, Englewood Cliffs, NJ.

Craig, R.J. ( May 1993 ). Six-sigma quality, the key to customer satisfaction, in 47th ASQC Annual Quality Congress Transactions , Boston, MA, pp. 206 “212.

Crow, E.L. and Shimizu, K., Eds. ( 1988 ). Lognormal Distributions, Theory and Application , Marcel Dekker, New York.

Cryer, J.D. and Ryan, T.P. ( July 1990 ). The estimation of sigma for an x chart, MR/d2 or S/c4, Journal of Quality Engineering , 22 (3), pp. 187 “192.

Daskalantonakis, M.K., Yacobellis, R.H., and Basili, VR. ( 1990 “1991 ). A method for assessing software measurement technology, Quality Engineering , 3 (1), pp. 27 “40.

Deleryd, M., Deltin, J., and Klefsjo, B. ( 1999 ). Critical factors for successful implementation of process capability studies, Quality Management Journal , 6 (1), pp. 40 “59.

Delott, C. and Gupta, P. ( 1990 ). Characterization of copper plating process for ceramic substrates, Quality Engineering , 2 (3), pp. 269 “284.

Deming, W.E. ( 1986 ). Out of the Crisis , Massachusetts Institute of Technology, Cambridge.

de Treville, S., Edelson, N.M., and Watson, R. ( May 1995 ). Getting six sigma back to basics, Quality Digest , 15 (5), pp. 42 “47.

Dietrich, E. and Schulze, A. ( 1999 ). Statistical Procedures for Machine and Process Qualification , 3rd ed., Quality Press, Milwaukee, WI.

Dodge, H.F. ( 1943 ). A sampling plan for continuous production, Annals of Mathematical Statistics , Vol. 14.

Dodge, H.F. ( 1955 ). Chain sampling inspection plans, Industrial Quality Control , Vol. 11.

Dodge, H.F. ( 1956 ). Skip-lot sampling plan, Industrial Quality Control , Vol. 11.

Dodge, H.F. and Romig, H.G. ( 1959 ). Sampling Inspection Tables, Single and Double Sampling , 2nd ed., John Wiley & Sons, New York.

Dodge, H.F. and Torrey, M.N. ( 1951 ). Additional continuous sampling inspection plans, Industrial Quality Control , Vol. 7.

Dodson, B.L. ( 1993 ). Determining the optimal target for a process with upper and lower specifications, Quality Engineering , 5 (3), pp. 393 “402.

Dorris, A.L. and Foote, B.J. ( 1978 ). Inspection error and statistical quality control: a survey, AIIE Transactions , Vol. 10.

Duncan, A.J. ( 1956 ). The economic design of x-charts used to maintain current control of a process, Journal of the American Statistical Association , Vol. 51.

Duncan, A.J. ( 1971 ). The economic design of x-charts when there is a multiplicity of assignable causes, Journal of the American Statistical Association , Vol. 66.

Duncan, A.J. ( 1974 ). Quality Control and Industrial Statistics , 4th ed., Irwin, Homewood, IL.

Duncan, A.J. ( 1978 ). The economic design of p-charts to maintain current control of a process: some numerical results, Technometrics , Vol. 20.

Durand, D. ( 1971 ). Stable Chaos , General Learning Corp., Morristown, NJ.

Eagle, A.R. ( March 1954 ). A method for handling errors in testing and measuring, Industrial Quality Control , pp. 10 “15.

English, J.R. and Taylor, G.D. ( July 1993 ). Process capability analysis ” a robustness study, International Journal of Production Research , 31 (7), pp. 1621 “1635.

Evans, D.H. ( October 1970 ). Statistical tolerancing formulation, Journal of Quality Technology , 2 (4), pp. 188 “195.

Evans, D.H. ( October 1974 ). Statistical tolerancing: the state of the art. I. Background, Journal of Quality Technology , 6 (4), pp. 188 “195.

Evans, D.H. ( January 1975 ). Statistical tolerancing: the state of the art. II. Methods for estimating moments, Journal of Quality Technology , 7 (1), pp. 1 “12.

Evans, D.H. ( April 1975 ). Statistical tolerancing: the state of the art. III. Shifts and drifts, Journal of Quality Technology , 7 (2), pp. 72 “26.

Ewan, W.D. ( 1963 ). When and how to use cu-sum charts, Technometrics , Vol. 5.

Fabian, R. ( November 1987 ). SPC-guided purchasing, Quality , 26 (11), pp. 32 “34.

Fan, J.Y. ( May 1990 ). Achieving 6 sigma in design, in 44th ASQC Annual Quality Congress Transactions , San Francisco, CA, pp. 851 “856.

Farnum, N.R. ( 1996 “1997 ). Using Johnson curves to describe non-normal process data, Quality Engineering , 9 (2), pp. 329 “336.

Fasser, Y. and Brettner, D. ( 1992 ). Process Improvement in the Electronics Industry , Wiley-Interscience, New York.

Fellers, G. ( 1991 ). SPC for Practitioners: Special Cases and Continuous Processes , ASQC Quality Press, Milwaukee, WI, pp. 44 “45.

Ferrell, E.B. ( 1953 ). Control charts using midranges and medians, Industrial Quality Control , Vol. 9.

Flaig, J.J. ( 1996 “1997 ). A new approach to process capability analysis, Quality Engineering , 9 (2), pp. 205 “211.

Flury, B.D., Nel, D.G., and Pienaar, I. ( December 1995 ). Simultaneous detection of shift in means and variances, Journal of the American Statistical Association , 90 (432), pp. 1474 “1481.

Fontenot, G., Behara, R., and Gresham, A. ( December 1994 ). Six sigma in customer satisfaction, Quality Progress , 27 (12), pp. 73 “76.

Franklin, L.A. and Wasserman, G.S. ( 1992 ). Bootstrap lower confidence limit estimates for capability indices, in 1992 Proceedings of the Section on Quality and Productivity , American Statistical Association, Boston, MA, pp. 169 “179.

Freund, R.A. ( 1957 ). Acceptance control charts, Industrial Quality Control , Vol. 12.

Fuchs, C. and Benjamini, Y. ( May 1994 ). Multivariate profile chart for statistical control, Technometrics , 36 (2), pp. 182 “195.

Gevirtz, C. ( April 1991 ). The fundamentals of advanced quality planning, Quality Progress , 24 (4), pp. 49 “51.

Gibra, I.N. ( 1967 ). Optimal control of processes subject to linear trends, Journal of Industrial Engineering , Vol. 18.

Gibra, I.N. ( 1971 ). Economically optimal determination of the parameters of an x-control chart, Management Science , Vol. 17.

Gibra, I.N. ( 1978 ). Economically optical determination of the parameters of np-control charts, Journal of Quality Technology , Vol. 10.

Gilson, J. ( 1951 ). A New Approach to Engineering Tolerances , Machinery Publishing Co., London.

Girshick, M.A. and Rubin, H. ( 1952 ). A Bayes' approach to a quality control model, Annals of Mathematical Statistics , Vol. 23.

Goel, A.L. and Wu, S.M. ( 1971 ). Determination of ARL and a contour nomogram for cusum charts to control normal means, Technometrics , Vol. 13.

Goel, A.L. and Wu, S.M. ( 1973 ). Economically optimum design of cusum charts, Management Science , Vol. 19.

Goel, A.L., Jain, S.C., and Wu, S.M. ( 1968 ). An algorithm for the determination of the economic design of x-charts based on Duncan's model, Journal of the American Statistical Association , Vol. 62.

Goh, T.N. ( 1989 ). Essential principles for decisionmaking in the application of statistical quality control, Quality Engineering , 1 (3), p. 256.

Goodson, R.M. ( May 1992 ). A simple method for estimating process spread, in 46th ASQC Annual Quality Congress Transactions , Nashville, TN, pp. 1030 “1036.

Gordon, G.G. and Weindling, J.I. ( 1975 ). A cost model for economic design of warning limit control chart schemes, AIIE Transactions , Vol. 7.

Grant, E.L. and Leavenworth, R.S. ( 1996 ). Statistical Quality Control , 7th ed., McGraw-Hill, New York.

Greenwich, M. and Chen, H.-N. ( March 1993 ). Confidence intervals for Cpk, in 40th Annual Minnesota Quality Conference Proceedings , Minneapolis, MN, pp. 2A-1 to 2A-8.

Grubbs, F.E. ( 1946 ). The difference control chart with an example of its use, Industrial Quality Control , Vol. 2.

Gruner, G. ( 1991 ). Calculation of Cpk under conditions of variable tolerances, Quality Engineering , 3 (3), pp. 281 “291.

Gruska, G.F., Mirkhani, K., and Lamberson, L.R. ( 1989 ). Non Normal Data Analysis , Applied Computer Solutions, Inc., St. Clair Shores, MI.

Gunter, B. ( March 1989 ). The use and abuse of Cpk. II, Quality Progress , 22 (3), pp. 108 “109.

Gunter, B. ( May 1989 ). The use and abuse of Cpk. III, Quality Progress , 22 (5), p. 79.

Gunter, B. ( October 1990 ). Go/no-go testing: going, going, gone? Quality Progress , 23 (10), pp. 110 “114.

Gunter, B. ( February 1991 ). I. What is a process capability study? Quality Progress , 24 (2), pp. 97 “100.

Gunter, B. ( August 1991 ). Process capability studies. IV. Applications of experimental design, Quality Progress , 24 (8), pp. 123 “132.

Gunter, B. ( February 1994 ). Q-Q plots, Quality Progress , 27 (2), pp. 81 “86.

Hahn, G.J. and Meeker, W.Q. ( 1991 ). Statistical Intervals: A Guide for Practitioners , John Wiley & Sons, New York.

Harding, A.J., Jr., Lee, K.R., and Mullins, J.L. ( May 1992 ). The effect of instabilities on estimates of sigma, in 46th ASQC Annual Quality Congress Transactions , Nashville, TN, pp. 1037 “1043.

Harris, T.J. and Ross, W.H. ( 1991 ). Statistical process control procedures for correlated observations, Canadian Journal of Chemical Engineering , 69, pp. 48 “57.

Harry, M.J. ( 1987 ). The Nature of Six Sigma Quality, Technical Report, Government Electronics Group, Motorola, Inc., Scottsdale, AZ, p. 1.

Harry, M. ( 1988 ). Six Sigma Mechanical Design Tolerancing , Motorola University Press, Schaumberg, IL.

Harry, M.J. ( 1994 ). The Vision of Six Sigma: Case Studies and Applications , 2nd ed., Sigma Publishing Co., Phoenix, AZ.

Harry, M.J. ( 1997 ). The Nature of Six Sigma Quality , Motorola University Press, Schaumberg, IL, pp. 4 and 12.

Harry, M.J. and Lawson, J.R. ( 1990 ). Six Sigma Producibility Analysis and Process Characterization , Motorola University Press, Schaumberg, IL.

Harry, M.J. and Lawson, J.R. ( 1992 ). Six Sigma Producibility Analysis and Process Characterization , Addison-Wesley, Reading, MA, pp. 6 “8.

Hart, M.K. and Hart, R.F. ( 1989 ). Quantitative Methods for Quality and Productivity Improvement , ASQC Quality Press, Milwaukee, WI.

Heimann, P.A. ( October 1996 ). Attributes control charts with large sample sizes, Journal of Quality Technology , 28 (4), pp. 451 “459.

Heiser, D.R. and Schikora, P. ( 2001 ). Flowcharting with excel, Quality Management Journal , 8 (3), pp. 26 “35.

Herman, J.T. ( May 1989 ). Capability index ” enough for process industries? in 43rd ASQC Annual Quality Congress Transactions , Toronto, Canada, pp. 670 “675.

Heyes, G.B. ( August 1987 ). Control chart sensitivity, Quality , 26 (8), p. 81.

Hill, W.J. and Bishop, L. ( 1990 “1991 ). Quality improvement approaches for chemical processes, Quality Engineering , 3 (2), pp. 137 “152.

Hillier, F.S. ( 1969 ). X- and R-chart control limits based on a small number of subgroups, Journal of Quality Technology , 1, pp. 17 “26.

Hoadley, B. ( 1986 ). Quality Measurement Plan, Encyclopedia of Statistical Sciences, Volume 7 , Kotz, A.S. and Johnson, N., Eds., John Wiley & Sons, New York, pp. 393 “397.

Holmes, D. ( December 1986 ). A quality portfolio management chart, Quality , 25 (12), p. 67.

Hotelling, H. ( 1947 ). Multivariate Quality Control, Techniques of Statistical Analysis , Eisenhart, A.C., Hastay, M., and Wallis, W. A., Eds., McGraw-Hill, New York, pp. 111 “184.

Hubele, N.F., Montgomery, D.C., and Chih, W.-H. ( 1992 ). An application of statistical process control in jet- turbine engine component manufacturing, Quality Engineering , 4 (2), pp. 197 “210.

Hubele, N.F., Shahriari, H., and Cheng, C.-S. ( 1991 ). A Bivariate Process Capability Vector, Statistical Process Control in Manufacturing , Keats, J.B. and Montgomery, D.C., Eds., Marcel Dekker, New York, pp. 299 “310.

Hulling, F.L. ( 1993 ). Process capability analysis with geometric tolerances, in 1993 Proceedings of the Section on Quality and Productivity , American Statistical Association, Alexandria, VA, pp. 207 “216.

Hunter, J.S. ( October 1986 ). The exponentially weighted moving average, Journal of Quality Technology , 18 (4), pp. 203 “210.

Hunter, J.S. ( 1989 “1990 ). A one-point plot equivalent to the Shewhart chart with Western Electric rules, Quality Engineering , 2 (1), pp. 13 “19.

Hunter, W.G. and Kartha, C.P. ( October 1977 ). Determining the most profitable target value for a production product, Journal of Quality Technology , 9 (4), pp.176 “181.

Hurayt, G. ( September 1992 ). Operating characteristic curves for the X-bar chart, Quality , 31 (9), p. 59.

International Quality Institute, Inc., Short Run MasterT Software Program, 1995 , Sacramento, CA.

James, P.C. ( September 1989 ). Cpk equivalencies, Quality , 28 (9), p. 75.

Janis, S.J. ( May 1990 ). Is your process too good for its control limits? in 44th ASQC Annual Quality Congress Transactions , San Francisco, CA, pp. 1006 “1011.

Johnson, N.L. and Leone, F.C. ( 1962a ). Cumulative sum control charts ” mathematical principles applied to their construction and use, Industrial Quality Control , Vol. 18.

Johnson, N.L. and Leone, F.C. ( 1962b ). Cumulative sum control charts ” mathematical principles applied to their construction and use, Industrial Quality Control , Vol. 18.

Johnson, N.L. and Leone, F.C. ( 1962c ). Cumulative sum control charts ” mathematical principles applied to their construction and use, Industrial Quality Control , Vol. 18.

Kane, V.E. ( January 1986 ). Process capability indices, Journal of Quality Technology , Vol. 18 (1), pp. 42, 45.

Kane, V.E. ( 1989 ). Defect Prevention: Use of Simple Statistical Tools , Marcel Dekker, New York.

Karl, D.P., Morisette, J., and Taam, W. ( 1994 ) Some applications of a multivariate: capability index in geometric dimensioning, and tolerancing, Quality Engineering , 6 (4), pp. 649 “665.

Keats, J.B., Miskulin, J.D., and Runger, G.C. ( July 1995 ). Statistical process control scheme, Journal of Quality Technology , 27 (3), pp. 214 “225.

Keenan, T. ( April 1996 ). At what price ppm? Ward's Auto World , 32 (4), p. 55.

Keenan, T. ( August 1996 ). Quality questions, Ward's Auto World , 32 (8), p. 28.

Keenan, T.M. ( May 1995 ). A system for measuring short-term producibility, in 49th ASQC Annual Quality Congress Transactions , Cincinnati, OH, pp. 50 “56.

Keenan, T.M. and Kim, J.S. ( March 1993 ). Normal tolerance limits: an alternative to Cpk, in 40th Annual Minnesota Quality Conference Transactions , Minneapolis, MN, pp. 2B-1 to 2B-8.

Keller, P.A. ( May/June 1993 ). Demystifying SPC. I. Choosing X over X-bar charts, PI Quality , 3, p. 26.

Keller, P.A. ( July/August 1993 ). Demystifying SPC. II. Sampling period, and autocorrelation, PI Quality , 3, pp. 34 “35.

Keller, P.A. ( September/October 1993 ). Demystifying SPC. III. EWMA makes it easy, PI Quality , 3, pp. 50 “52.

Kelly, H.W. and Seymour, L.A. ( 1993 ). Data Display , Addison-Wesley, Reading, MA.

Kocherlakota, S. and Kocherlakota, K. ( 1991 ). Process capability index: bivariate normal distribution, Communications in Statistics ” Theory and Methods , 20 (8), pp. 2529 “2547.

Kocherlakota, S., Kocherlakota, K., and Kirmani, S.N.U.A. ( 1992 ). Process capability indices under non-normality, International Journal of Mathematical Statistics , Vol. 1.

Koons, G.F. ( 1992 ). Indices of Capability: Classical and Six Sigma Tools , Addison-Wesley, Reading, MA.

Koons, G.F. and Luner, J.J. ( October 1991 ). SPC in low-volume manufacturing: a case study, Journal of Quality Technology , 23 (4), pp. 287 “295.

Kotz, S. and Johnson, N.L. ( 1993 ). Process Capability Indices , Chapman & Hall, London.

Kourti, T. and MacGregor, J.F. ( 1995 ). Process analysis, monitoring and diagnosis using multivariate projection methods, Journal of Chemometrics and Intelligent Laboratory Systems , 28, pp. 3 “21.

Kourti, T. and MacGregor, J.F. ( October 1996 ). Multivariate SPC methods for process and product monitoring, Journal of Quality Technology , 28 (4), pp. 409 “428.

Koziol, J.A. ( 1982 ). A class of invariant procedures for assessing multivariate normality, Biometrika , 69, pp. 423 “427.

Kresta, J., MacGregor, J.F., and Marlin, T.E. ( 1991 ). Multivariate statistical monitoring of process operating performance, Canadian Journal of Chemical Engineering , 69, pp. 35 “47.

Krishnamoorthi, K.S. ( 1990 “1991 ). On assignable causes that cannot be eliminated ” an example from a foundry, Quality Engineering , 3 (1), pp. 41 “47.

Kume, H. ( 1985 ). Statistical Methods for Quality Improvement , AOTS, Chosakai, Ltd., Tokyo, p. 63.

Kushler, R.H. and Hurley, P. ( October 1992 ). Confidence bounds for capability indices, Journal of Quality Technology , 24 (4), pp. 192 “194.

Ladany, S.P. ( 1973 ). Optimal use of control charts for controlling current production, Management Science , Vol. 19.

Lam, C.T. and Littig, S.J. ( 1992 ). A New Standard in Process Capability Analysis, Technical Report 92 “23, University of Michigan, Ann Arbor.

Larsson, B. ( November 1989 ). Multiple fixture SPC, Quality , 28 (11), p. 63.

Lawson, J.S. ( January 1988 ). A case study of effective use of statistical experimental design in a smoke stack industry, Journal of Quality Technology , 20 (1), pp. 51 “55.

Lehrman, K.H. ( 1991 “1992 ). Process capability analyses and index interval estimates: quantitative characteristics (variables), Quality Engineering , 4 (1), pp. 93 “130.

Lehrman, K.-H. ( 1991 “1992 ). Control charts for variables and attributes with process safety analyses, Quality Engineering , 4 (2), pp. 243 “318.

Levinson, H.J. and Ben-Jacob, J. ( 1996 ). Managing quality improvement on a development pilot line, Quality Management Journal , 3 (2), pp. 16 “35.

Lewis, S.S. ( 1991 ). Process capability estimates from small samples, Quality Engineering , 3 (3), p. 387.

Li, H., Owen, D.B., and Borrego, A.S.A. ( 1990 ). Lower confidence limits on process capability indices based on the range, Communications in Statistics ” Simulation Comp ., 19, pp. 1 “24.

Liao, W.S., Wu, S.M., and Ermer, D.S. A time series approach to quality assurance, Inspection and Quality Control in Manufacturing Systems , ASME, Vol. 5.

Lieberman, G. and Resnikoff, G. ( 1955 ). Sampling plans for inspection by variables, Journal of the American Statistical Association , 50, pp. 457 “516.

Lieberman, G.J. and Solomon, H. ( 1955 ). Multi-level continuous sampling plans, Annals of Mathematical Statistics , Vol. 26.

Lindenmeyer, C.R., Bush, E.E., and Andrews, H.W. ( April 1984 ). Machine setting to minimize scrap and rework costs, Journal of Quality Technology , 16 (2), pp. 121 “124.

Littig, S.J. and Lam, T.C. ( May 1993 ). Case studies in process capability measurement, in 47th ASQC Annual Quality Congress Transactions , Boston, MA, pp. 572 “574.

Littig, S.J., Lam, C.T., and Pollock, S.M. Process Capability Measurements for Multivariate Processes: Definitions and Example for a Gear Carrier, Technical Report No. 42, Industrial and Operations Engineering Department, University of Michigan, Ann Arbor.

Littig, S.J., Lam, C.T., and Pollock, S.M. Process Capability Measurements for a Bivariate Characteristic over an Elliptical Tolerance Zone, Technical Report 92 “42, University of Michigan, Ann Arbor.

Little, T.A. and Harrelson, C.S. ( May 1993 ). Short run capability assessment using the t distribution, in 47th ASQC Annual Quality Congress Transactions , Boston, MA, pp. 181 “191.

Liu, R.Y. ( December 1995 ). Control charts for multivariate processes, Journal of the American Statistical Association , 90 (432), pp. 1380 “1387.

Long, J.M. and De Coste, M.J. ( May 1988 ). Capability studies involving tool wear, in 42nd ASQC Annual Quality Congress Transactions , Dallas, TX, pp. 590 “596.

Lucas, J.M. ( 1982 ). Combined Shewhart-cusum quality control schemes, Journal of Quality Technology , Vol. 14.

Lucas, J.M. and Saccucci, M.S. ( February 1990 ). Exponentially weighted moving average control schemes: properties and enhancements, Technometrics , 32 (1), pp. 1 “12.

Lucas, M. ( 1973 ). A modified V-mask control scheme, Technometrics , Vol. 15.

Lucas, M. ( 1976 ). The design and use of cumulative sum quality control schemes, Journal of Quality Technology , Vol. 8.

Lucas, M. and Crosier, R.B. ( 1982 ). Fast initial response for cusum quality control schemes, Technometrics , Vol. 24.

Lyth D.M. and Rabiej, R.J. ( 1995 “1996 ). Critical variables in wood manufacturing's process capability: species, structure, and moisture content, Quality Engineering , 8 (2), pp. 275 “281.

MacGregor, J.F. and Kourti, T. ( 1995 ). Statistical process control of multivariate processes, Control Engineering , Practice 3, pp. 403 “414.

Mader, D.P., Seymour, L.A., Brauer, D.C., and Gallemore, M.L. ( 1993 ). Process Control Methods , Addison-Wesley, Reading, MA.

Madigan, J.M. ( October 1993 ). Measures matrix chart: a holistic approach to understanding operations, Quality Management Journal , 1 (1), pp. 77 “86.

Mamzic, C.L. and Tucker, T.W. ( November 1988 ). SPC in the process industries. I, Hydrocarbon Processing , 67 (11), pp. 132D “132P.

Mamzic, C.L. and Tucker, T.W. ( December 1988 ). SPC in the process industries. II, Hydrocarbon Processing , 67 (12), p. 34C.

Mandel, B.J. ( 1969 ). The regression control chart, Journal of Quality Technology , 1 (1), pp. 1 “9.

Mandel, J. ( 1969 ). The regression control chart, Journal of Quality Technology , Vol. 1.

Manuele, J. ( 1945 ). Control chart for determining tool wear, Industrial Quality Control , Vol. 1.

Marcucci, M.O. and Beazley, C.C. ( 1988 ). Capability indices: process performance measures, in 42nd ASQC Annual Quality Congress Transactions , Dallas, TX, pp. 516 “523.

Martha, K.V ( 1974 ). Applications of some measures of multivariate skewness and kurtosis in testing normality and robustness studies, Sankhy, Series B , 36, pp. 115 “128.

Martin, J.E. ( 1991 ). SPC bridges lab/production gap, PI Quality , 1, pp. 40 “41.

Mason, R.L. and Young, J.C. ( April 2001 ). Implementing multivariate statistical process control using Hotelling's T 2 statistic, Quality Progress , pp. 71 “73.

Mason, R.L., Tracy, N.D., and Young, J.C. ( April 1995 ). Decomposition of T 2 for multivariate control chart interpretation, Journal of Quality Technology , 27 (2), pp. 99 “108.

Mason, R.L., Tracy, N.D., and Young, J.C. ( January 1996 ). Monitoring a multivariate step process, Journal of Quality Technology , 28 (1), pp. 39 “50.

Mayne, E., Murphy, T., and Winter, D. ( July 2001 ). The quality crunch, Ward's Auto World , pp. 32 “37.

McCoy, P.F. ( February 1991 ). Using performance indexes to monitor production processes, Quality Progress , 24 (2), pp. 49 “55.

McFadden, F.R. ( June 1993 ). Six-sigma quality programs, Quality Progress , 26 (6), pp. 37 “42.

McNeese, W.H. and Klein, R.A. ( 1991 ). Statistical Methods for the Process Industries , ASQC Quality Press, Milwaukee, WI.

Minitab. ( 2001 ). Minitab Release 13 , Minitab, Inc., State College, PA.

Mirabella, J. ( August 1991 ). Determining which capability index to use, Quality Progress , 24 (8), pp. 8 “10.

Mittag, H.J. and Rinne, H. ( 1993 ). Statistical Methods of Quality Assurance , Chapman & Hall, London, p. 454.

Montgomery, D.C. ( 1991 ). Introduction to Statistical Quality Control , 2nd ed., John Wiley & Sons, New York.

Montgomery, D.C. ( 2001 ). Introduction to Statistical Quality Control , 4th ed., John Wiley & Sons, New York.

Montgomery, D.C. and Heikes, R.G. ( 1976 ). Process failure mechanisms and optimal design of fraction defective control charts, AIIE Transactions , Vol. 8.

Montgomery, D.C. and Johnson, L.A. ( 1976 ). Forecasting and Time Series Analysis , McGraw-Hill, New York.

Montgomery, D.C. and Klatt, P.J. ( 1972 ). Economic design of T 2 control charts, to maintain current control of a process, Management Science , Vol. 19.

Montgomery, D.C. and Klatt, P.J. ( 1972 ). Minimum cost multivariate quality control tests, AIIE Transactions , Vol. 4.

Montgomery, D.C. and Mastrangelo, C.M. ( July 1991 ). Some statistical process control methods for autocorrelated data, Journal of Quality Technology , 23 (3), pp. 179 “193.

Montgomery, D.C. and Wadsworth, H.M., Jr. ( 1972 ). Some techniques for multivariate quality control applications, in ASQC Technical Conference Transactions , Washington, D.C.

Montgomery, D.C., Heikes, R.G., and Mance, J.F. ( 1975 ). Economic design of fraction defective control charts, Management Science , Vol. 21.

Montgomery, D.C., Keats, B.J., Runger, G.C., and Messina, W.S. ( April 1994 ). Integrating statistical process control and engineering process control, Journal of Quality Technology , 26 (2), pp. 79 “87.

Mortell, R.R. and Runger, G.C. ( January 1995 ). Statistical control of multiple stream processes, Journal of Quality Technology , 27 (1), pp. 1 “12.

Munechika, M. ( 1986 ). Evaluation of process capability for skew distributions, in Proceedings of the 30th European Organization of Quality Annual Conference .

Munro, R.A. ( May 1992 ). Using capability indexes in your shop, Quality Digest , 12 (5), pp. 58 “59.

Murphy, B.J. ( 1987 ). Selecting out of control variables with the TZ multivariate quality control procedure, The Statistician , 36, pp. 571 “583.

Nagashima, S. ( 1973 ). 100 Management Charts, Asian Productivity Organization, Tokyo.

Nagata, Y. ( 1991 ). Interval estimation for the process capability indices, Journal of Japanese Society for Quality Control , 21, pp. 109 “114.

Nelson, L.S. ( April 1978 ). Best target value for a production process, Journal of Quality Technology , 10 (2), pp. 88 “89.

Nelson, L.S. ( October 1989 ). Standardization of Shewhart control charts, Journal of Quality Technology , 2 (4), pp. 287 “289.

Nelson, L.S. ( July 1993 ). A control chart for parts-per-million nonconforming items, Journal of Quality Technology , 26 (3), pp. 239 “240.

Noguera, J. ( May 1992 ). Implementing six sigma for interconnect technology, in 46th ASQC Annual Quality Congress Transactions , Nashville, TN, pp. 538 “544.

Nomikos, P. and MacGregor, J.F. ( February 1995 ). Multivariate SPC charts for batch processes, Technometrics , 37 (1), pp. 41 “59.

Osuga, Y. ( 1964 ). Process Capability Studies in Cutting Processes, Reports of Statistical Applications Research , Japanese Union of Scientists and Engineers, 11 (1), pp. 23 “25.

Ott, E.R. and Snee, R.D. ( 1973 ). Identifying useful differences in a multiple-head machine, Journal of Quality Technology , Vol. 5.

Padgett, M.M., Vaughn, L.E., and Lester, J.A. ( 1995 ). Statistical process control and machine capability in three dimensions, Quality Engineering , 7 (4), pp. 779 “796.

Page, E.S. ( 1954 ). Continuous inspection schemes, Biometrics , Vol. 41.

Page, E.S. ( 1961 ). Cumulative sum control charts, Technometrics , Vol. 3.

Page, E.S. ( 1963 ). Controlling the standard deviation by cusums and warning lines, Technometrics , Vol. 5.

Palm, A.C. ( May 1990 ). SPC versus automatic process control, in 44th ASQC Annual Quality Congress Transactions , San Francisco, CA, pp. 694 “699.

Paulk, M., Weber, C., Garcia, S., Chrissis, M., and Bush, M. ( 1993 ). Key Practices of the Capability Maturity Model , Version 1.1, CMU/SEI-93-TR-25, Software Engineering Institute, Carnegie Mellon University, Pittsburgh, PA, pp. L4-1.

Pearn, W.L. and Kotz, S. ( 1994 “1995 ). Application of Clement's method for calculating second and third-generation process capability indices for non-normal Pearsonian populations, Quality Engineering , 7 (1), pp. 139 “145.

Pearn, W.L., Kotz, S., and Johnson, N.L. ( 1992 ). Distributional and inferential properties of process capability indices, Journal of Quality Technology , 24 (4), pp. 216 “231.

Pena, E. ( October 1990 ). Motorola's secret to total quality control, Quality Progress , 23 (10), pp. 43 “45.

Perry, R.L. ( 1973 ). Skip-lot sampling plans, Journal of Quality Technology , Vol. 5.

Phadke, M.S. ( 1989 ). Quality Engineering Using Robust Design , Prentice-Hall, Englewood Cliffs, NJ.

Phillips, G.P. ( 1994 “1995 ). Target ratio simplifies capability index system, makes it easy to use cpm, Quality Engineering , 7 (2), pp. 299 “313.

Pignatiello, J.J. and Ramberg, J.S. ( May 1993 ). Process capability indices: just say no! in 47th ASQCAnuual Quality Congress Transactions , Boston, MA, pp. 101 “102.

Pitt, H. ( 1994 ). SPC for the Rest of Us: A Personal Path to Statistical Process Control , Addison-Wesley, Reading, MA.

Podolski, G. ( 1989 “1990 ). Standard deviation: root mean square versus range conversion, Quality Engineering , 2 (2), pp. 156 “157.

Porter, L.J. and Oakland, J.S. ( 1990 ). Measuring process capability using indices ” some new considerations, Quality and Reliability Engineering International , 6, pp. 19 “27.

Proschan, F. and Savage, LR. ( September 1960 ). Starting a control chart, Industrial Quality Control , 17 (3), pp. 12 “13.

Pugh, G.A. ( 1994 “1995 ). On the application of individual and moving-range charts to insulated wire production, Quality Engineering , 7 (1), pp. 105 “111.

Pyzdek, T. ( 1992 ). Process capability analysis using personal computers, Quality Engineering , 4 (3), pp. 419 “440.

Pyzdek, T. ( 1992 ). Pyzdek's Guide to SPC , Vol. 2, Quality Press, Milwaukee, WI.

Quesenberry, C.P. ( October 1988 ). An SPC approach to compensating a tool-wear process, Journal of Quality Technology , 20 (4), pp. 220 “229.

Quesenberry, C.P. ( July 1991 ). SPC Q charts for start-up processes and short or long runs, Journal of Quality Technology , 23 (3), pp. 213 “224.

Rado, L.G. ( April 1989 ). Enhance product development by using capability indexes, Quality Progress , 22 (4), pp. 38 “41.

Reynolds, J.H. ( 1971 ). The run sum control chart procedure, Journal of Quality Technology , Vol. 3.

Roberts, S.W. ( 1958 ). Properties of control chart zone tests, Bell System Technical Journal , Vol. 37.

Roberts, S.W. ( 1959 ). Control chart tests based on geometric moving averages, Technometrics , Vol. 1.

Ross, S.M. ( 1971 ). Quality control under Markovian deterioration, Management Science , Vol. 17.

Royston, J.P. ( 1983 ). Some techniques for assessing multivariate normality based on the Shapiro-Wilks W, Applied Statistics , 32 (2), pp. 121 “133.

Runger, G.C. ( 1994 “1995 ). Robustness of variance estimates for batch and continuous processes, Quality Engineering , 7 (1), pp. 31 “43.

Ryan, T.P. ( 1989 ). Statistical Methods for Quality Improvement , John Wiley & Sons, New York, pp. 215 “227.

Ryan, T.P. and Schwertman, N.C. ( January 1997 ). Optimal control limits for attributes control charts, Journal of Quality Technology , 29 (1), pp. 86 “98.

Saniga, E.M. ( 1978 ). Joint economically optimal design of x and R control charts, Management Science , Vol. 24.

Schilling, E.G. and Nelson, P.R. ( 1976 ). The effect of nonnormality on the control limits of x charts, Journal of Quality Technology , Vol. 8.

Schmidt, J.W., Bennett, G.K., and Case, K.E. ( 1976 ). A three-action cost model for acceptance sampling by variables, Journal of Quality Technology , Vol. 12.

Schmidt, J.W., Case, K.E., and Bennett, G.K. ( 1974 ). The choice of variables sampling plans using cost effective criteria, AIIE Transactions , Vol. 6.

Schneider, H. and Pruett, J.M. ( 1994 ). Control charting issues in the process industries, Quality Engineering , 6 (3), pp. 347 “373.

Seder, L.A. and Cowan, D. ( 1956 ). The Span Plan Method: Process Capability Analysis, ASQC General Publications No. 3 , American Society for Quality Control, Milwaukee, WI.

Shapiro, S.S. ( 1980 ). How to Test Normality and Other Distributional Assumptions, Vol. 3, The ASQC Basic References in Quality Control: Statistical Techniques , American Society for Quality Control, Milwaukee, WI.

Shaw, J.A. ( 1991 ). Statistical process control for the process industries, ISA Transactions , 30 (1), pp. 11 “34.

Sheaffer, R.L. and Leavenworth, R.S. ( 1976 ). The negative binomial model for counts in units of varying size , Journal of Quality Technology , Vol. 8.

Shewhart, W.A. ( 1986 ). Statistical Method from the Viewpoint of Quality Control , Dover Publications, New York.

Shunta, J.P. ( 1995 ). Achieving World Class Manufacturing through Process Control , Prentice-Hall, Englewood Cliffs, NJ.

Smith, G.M. ( 2001 ). Statistical Process Control and Quality Improvement , Quality Press, Milwaukee, WI.

Som, R.K. ( 1996 ). Practical Sampling Techniques , 2nd ed., Marcel Dekker, New York.

Somerville, S.E. and Montgomery, D.C. ( 1996 “1997 ). Process capability indices and non-normal distributions, Quality Engineering , 9 (2), pp. 305 “316.

Spiring, F.A. ( May 1989 ). An application of cpm to the tool wear problem, in 43rd ASQC Annual Quality Congress Transactions , Toronto, Canada, pp. 123 “128.

Spiring, F.A. ( April 1991 ). Assessing process capability in the presence of systematic assignable cause, Journal of Quality Technology , 23 (2), pp. 125 “134.

Spurrier, J.D. and Thombs, L.A. ( 1990 ). Control charts for detecting cyclical behavior, Technometrics , 32, pp. 163 “171.

Stamatis, D.H. ( 1996 ). Total Quality Management in Healthcare: Implementation Strategies for Optimum Results , Irwin, Chicago, IL.

Stamatis, D.H. ( 1996 ). Total Quality Service , St. Lucie Press, Delray Beach, FL.

Stamatis, D.H. ( 1998 ). Implementing the TE supplement to QS-9000 , Quality Resources, New York.

Stephens, K.S. ( 1979 ). How to Perform Continuous Sampling (CSP), Vol. 2, The ASQC Basic References in Quality Control: Statistical Techniques , American Society for Quality Control, Milwaukee, WI.

Stewart, R.D., Montgomery, D.C., and Heikes, R.G. ( 1978 ). Choice of double sampling plans based on prior distributions and costs, AIIE Transactions , Vol. 10.

Subbaiah, P. and Taam, W. ( 1993 ). Inference on the capability index: cpm, Communications in Statistics - Theory and Methods , 22 (2), pp. 537 “560.

Subramanyam, N. and Houshmand, A.A. ( 1995 ). Simultaneous representation of multivariate and corresponding univariate X charts using line-graph, Quality Engineering , 7 (4), pp. 681 “692.

Taam, W., Subbaiah, P., and Liddy, J.W. ( 1993 ). A note on multivariate capability indices, Journal of Applied Statistics , 20 (3), pp. 339 “351.

Tadikamalla, P.R. ( November 1994 ). The confusion over six-sigma quality, Quality Progress , 21 (11), pp. 83 “85.

Tatum, L.G. ( May 1996 ). Control charts for the detection of a periodic component, Technometrics , 38 (2), pp. 152 “160.

Tavormina, J.J. and Buckley, S. ( November 1992 ). SPC and six-sigma, Quality , 31 (11), p. 47.

Taylor, H.M. ( 1965 ). Markovian sequential replacement processes, Annals of Mathematical Statistics , Vol. 36.

Taylor, H.M. ( 1967 ). Statistical control of a gaussian process, Technometrics , Vol. 9.

Taylor, H.M. ( 1968 ). The economic design of cumulative sum control charts, Technometrics , Vol. 10.

Taylor, W.A. ( 1991 ). Optimization and Variation Reduction in Quality , McGraw-Hill, New York.

Thompson, L.A., Jr. ( May 1989 ). SPC and the job shop ” strange bedfellows? in 43rd ASQC Annual Quality Congress Transactions , Toronto, Canada, pp. 896 “901.

Timm, N.H. ( April 1996 ). Multivariate quality control using finite intersection tests, Journal of Quality Technology , 28 (2), pp. 233 “243.

Tomas, S. ( October 1991 ). Motorola's six steps to six sigma, in 34th International Conference Proceedings , APICS, Seattle, WA, pp. 166 “169.

Tracy, N.D., Young, J.C., and Mason, R.L. ( April 1992 ). Multivariate control charts for individual observations, Journal of Quality Technology , 24 (2), pp. 88 “95.

Traver, M.G. ( May 1984 ). Multistation process capability ” filling equipment, in 40th ASQC Annual Quality Congress Transactions , Chicago, IL, pp. 281 “289.

Traver, R.W. and Davis, J.M. ( 1962 ). How to determine process capabilities in a developmental shop, Industrial Quality Control , 18 (9), pp. 26 “29.

Tseng, S.-T. and Wu, T.-Y. ( January 1991 ). Selecting the best manufacturing process, Journal of Quality Technology , 23 (1), pp. 53 “62.

United States Department of Defense. ( 1957 ). Sampling Procedures and Tables for Inspection by Variables for Percent Defective, MIL STD 414, U.S. Government Printing Office, Washington, D.C.

United States Department of Defense. ( 1963 ). Sampling Procedures and Tables for Inspection by Attributes, MIL STD 105D, U.S. Government Printing Office, Washington, D.C.

Vander Wiel, S.A. ( May 1996 ). Monitoring processes that wander using integrated moving average models, Technometrics , 38 (2), pp. 139 “151.

von Neumann, J. ( 1941 ). Distribution of the ratio of the mean square successive difference to the variance, Annals of Mathematical Statistics , 13, pp. 86 “88.

Wald, A. ( 1947 ). Sequential Analysis , John Wiley & Sons, New York.

Wang, C.H. and Hillier, F.S. ( 1970 ). Mean and variance control chart limits based on a small number of subgroups, Journal of Quality Technology , Vol. 2.

Wardell, D.G., Moskowitz, H., and Plante, R.D. ( 1992 ). Control charts in the presence of data correlation, Management Science , 38 (8), pp. 1084 “1105.

Weiler, H., ( 1952 ). On the most economical sample size for controlling the mean of a population, Annals of Mathematical Statistics , Vol. 23.

Weiler, H. ( 1953 ). The use of runs to control the mean in quality control, Journal of the American Statistical Association , Vol. 48.

Weiler, H. ( 1954 ). A new type of control limit for means, ranges, and sequential runs, Journal of the American Statistical Association , Vol. 49.

Western Electric. ( 1956 ). Statistical Quality Control Handbook , Western Electric Corporation, Indianapolis, IN.

Wetherill, G.B. and Chiu, W.K. ( 1975 ). A review of acceptance sampling schemes with emphasis on the economic aspect, International Statistical Review , Vol. 43.

Wheeler, D.J. ( 1991 ). Short Run SPC , SPC Press, Inc., Knoxville, TN.

Wheeler, D.J. ( May 1994 ). Charts done right, Quality Progress , 27 (5), pp. 65 “68.

Wheeler, D.J. ( 1995 ). Advanced Topics in Statistical Process Control , SPC Press, Inc., Knoxville, TN.

Wheeler, D.J. ( December 1996 ). Charts for rare events, Quality Digest , p. 43.

Wheeler, D.J. and Chambers, D.S. ( 1992 ). Understanding Statistical Process Control , 2nd ed., SPC Press, Inc., Knoxville, TN.

Whiechec, W.J., Ed. ( June 1978 ). Measurement System Analysis, Chevrolet, Product Assurance.

White, C.C. ( 1974 ). A Markov quality control process subject to partial observation, Management Science , Vol. 23.

Wierda, S.J. ( May 1993 ). A multivariate process capability index, in 47th Annual ASQC Quality Congress Transactions , Boston, MA, pp. 342 “348.

Wierda, S.J. ( 1994 ). Multivariate statistical process control ” recent results and directions for future research, Statistica Neerlandica , 48, pp. 147 “168.

Windham, J. ( December 1995 ). Implementing Deming's fourth point, Quality Progress , 28 (12), pp. 43 “48.

Woodhall, W. and Ncube, M. ( 1985 ). Multivariate CUSUM quality-control procedures, Technometrics , 27, pp. 285 “292.

Wright, D. ( March 1993 ). Multivariable charting, Quality , 32 (3), p. 49.

Yang, C.H. and Hillier, F.S. ( 1970 ). Mean and variance control chart limits based on a small number of subgroups, Journal of Quality Technology , 2, pp. 9 “16.

Yun, C.Z., Yong, Y.W., and Loh, L. ( 1996 ). The Quest for Global Quality , Addison-Wesley, Singapore.

Zaciewski, R.D. ( May 1995 ). Attribute control charts: opportunities for application, Quality Digest , 15 (5), pp. 36 “41.

Zimmerman, S.M. and Icenogle, M.L. ( 1998 ). Statistical Quality Control Using Excel (with software) , Quality Press, Milwaukee, WI.




Six Sigma and Beyond. Statistical Process Control (Vol. 4)
Six Sigma and Beyond: Statistical Process Control, Volume IV
ISBN: 1574443135
EAN: 2147483647
Year: 2003
Pages: 181
Authors: D.H. Stamatis

flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net