Cause Values

Prestaging: Frame Switch Configuration

Configure the Frame Relay switch with the PVCs as depicted in Figure 18-9; do not time yourself on this portion of the lab. Example 18-7 lists the configuration for the Frame Relay switch.

Figure 18-9. Frame Relay Switch Configuration

Example 18-7 Frame Relay Switch Configuration

  hostname frame_switch   !   frame-relay switching   !   <<<text omitted>>>   !   interface Serial0   no ip address   encapsulation frame-relay   no fair-queue   clockrate 148000   frame-relay lmi-type ansi   frame-relay intf-type dce   frame-relay route 121 interface Serial1 120   frame-relay route 141 interface Serial3 140   !   interface Serial1   no ip address   encapsulation frame-relay   clockrate 148000   frame-relay intf-type dce   frame-relay route 120 interface Serial0 121   frame-relay route 130 interface Serial3 131   !   interface Serial3   no ip address   encapsulation frame-relay   clockrate 64000   frame-relay intf-type dce   frame-relay route 131 interface Serial1 130   frame-relay route 140 interface Serial0 141   !  

The following portion of the lab is timed, and it should begin after the configuration and physical installation of the Frame switch and the backbone router. Do not configure any other routers at this time.