Part II

Prestaging: Backbone Router Configuration

Configure R7 as a backbone router. Configure R7 as an external BGP peer to R2's IP address of 192.128.128.2/24. Use 2010 as the Autonomous System ID for this router. Configure loopback interfaces on this router with the following addresses:

128.200.1.1/24

128.201.1.1/24

128.202.1.1/24

Use the network command to circulate the networks. Example 18-2 illustrates the configuration of the backbone router R7.

Example 18-2 Backbone Router Configuration

  hostname r7_backbone_router   !   interface Loopback20   ip address 128.200.1.1 255.255.255.0   !   interface Loopback21   ip address 128.201.1.1 255.255.255.0   !   interface Loopback22   ip address 128.202.1.1 255.255.255.0   !   interface Ethernet1   description place in vlan 3  backbone 1   ip address 192.128.128.1 255.255.255.0   media-type 10BaseT   ip rip send version 2   ip rip receive version 2   !   router rip   version 2   no auto-summary   network 192.128.128.0   network 128.200.0.0   network 128.201.0.0   network 128.202.0.0   !   router bgp 2010   no synchronization   network 192.128.128.0   network 128.200.0.0   network 128.201.0.0   network 128.202.0.0   neighbor 192.128.128.2 remote-as 2001   neighbor 192.128.128.2 ebgp-multihop 10   !  

The following portion of the lab is timed, and it should begin after the configuration and physical installation of the Frame Relay switch and the backbone router.