Section 8.6. Asterisk and VoIP

8.6. Asterisk and VoIP

It should come as no surprise that Asterisk loves to talk VoIP. But in order to do so, Asterisk needs to know which function it is to perform: that of client, server, or both. One of the most complex and often confusing concepts in Asterisk is the naming scheme of inbound and outbound authentication.

8.6.1. Users and Peers and FriendsOh My!

Connections that authenticate to us, or that we authenticate, are defined in the iax.conf and sip.conf files as users and peers . Connections that do both may be defined as friends . When determining which way the authentication is occurring, it is always important to view the direction of the channels from Asterisk's viewpoint, as connections are being accepted and created by the Asterisk server.

8.6.1.1. Users

A connection defined as a user is any system/user/endpoint that we allow to connect to us. Keep in mind that a user definition does not provide a method with which to call that userthe user type is used simply to create a channel for incoming calls. [*] A user definition will require a context name to be defined to indicate where the incoming authenticated call will be placed in the dialplan (in extensions.conf ).

[*] In SIP, this is not always the case. If the endpoint is a SIP proxy service (as opposed to a user agent), Asterisk will authenticate based on the peer definition, matching the IP address and port in the Contact field of the SIP header against the hostname (and port, if specified) defined for the peer (if the port is not specified, the one defined in the [general] section will be used). See the discussion of the SIP insecure option in Appendix A for more on this subject.

8.6.1.2. Peers

A connection defined as a peer type is an outgoing connection. Think of it this way: users place calls to us, while we place calls to our peers . Since peers do not place calls to us, a peer definition does not typically require the configuration of a context name. However, there is one exception: if calls that originate from your system are returned to your system in a loopback, the incoming calls (which originate from a SIP proxy, not a user agent) will be matched on the peer definition. The default context should handle these incoming calls appropriately, although it's preferable for contexts to be defined for them on a per-peer basis. [ ]

[ ] For more information on this topic, see the discussion of the SIP context option in Appendix A.

In order to know where to send a call to a host, we must know its location in relation to the Internet (that is, its IP address). The location of a peer may be defined either statically or dynamically. A dynamic peer is configured with host=dynamic under the peer definition heading. Because the IP address of a dynamic peer may change constantly, it must register with the Asterisk box to let it know what its IP address is, so calls can successfully be routed to it. If the remote end is another Asterisk box, the use of a register statement is required, as discussed below.

8.6.1.3. Friends

Defining a type as a friend is a shortcut for defining it as both a user and a peer . However, connections that are both a user and a peer aren't always defined this way, because defining each direction of call creation individually (using both a user and a peer definition) allows more granularity and control over the individual connections.

Figure 8-1 shows the flow of authentication control in relation to Asterisk.

Figure 8-1. Call origination relationships of users, peers, and friends to Asterisk

8.6.2. register Statements

A register statement is a way of telling a remote peer where your Asterisk box is in relation to the Internet. Asterisk uses register statements to authenticate to remote providers when you are employing a dynamic IP address, or when the provider does not have your IP address on record. There are situations when a register statement is not required, but to demonstrate when a register statement is required, let's look at an example.

Say you have a remote peer that is providing DID services to you. When someone calls the number +1-800-555-1212, the call goes over the physical PSTN network to your service provider and into their Asterisk server, possibly over their T-1 connection. This call is then routed to your Asterisk server via the Internet.

Your service provider will have a definition in either their sip.conf or iax.conf configuration file (depending on whether you are connecting with the SIP or IAX protocol, respectively) for your Asterisk server. If you receive calls only from this provider, you would define them as a user (if they were another Asterisk system, you might be defined in their system as a peer).

Now let's say that your box is on your home Internet connection, with a dynamic IP address. Your service provider has a static IP address (or perhaps a fully qualified domain name), which you place in your configuration file. Since you have a dynamic address, your service provider specifies host=dynamic in its configuration file. In order to know where to route your +1-800-555-1212 call, your service provider needs to know where you are located in relation to the Internet. This is where the register statement comes into use.

The register statement is a way of authenticating and telling your peer where you are. In the [general] section of your configuration file, you would place a statement similar to this:

 register => username:secret@my_remote_peer 

You can verify a successful register with the use of the iax2 show registry and sip show registry commands at the Asterisk console.



Asterisk. The Future of Telephony
Asterisk: The Future of Telephony: The Future of Telephony
ISBN: B0026OR3OO
EAN: N/A
Year: 2001
Pages: 380

Similar book on Amazon

flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net