Final Disk Configuration

Once you have labeled all of your disks, you'll see the following message:

 Done - no available disks found. You have configured the following partitions and mount points: wd0a / wd0d /usr wd0e /var sd0a /database sd1d /home 

Take one last look at your disks, and confirm that this is where you want your partitions. While the partitioning process made recovery of data difficult, the next step will make recovery darn near impossible.

 The next step creates a filesystem on each partition, ERASING existing data. Are you really sure that you're ready to proceed? [n] y 

The default is to not proceed. Hit "y" here to go on, and you'll see messages much like this for each of your partitions.

 /dev/rwd0a:     1024064 sectors in 1016 cylinders of 16 tracks, 63 sectors         500.0MB in 64 cyl groups (16 c/g, 7.88MB/g, 1920 i/g) 

Once all of your partitions have been formatted, you'll see the mount point and mount option information for each partition.

 /dev/wd0a on /mnt type ffs (rw, asynchronous, local, ctime=Sun Oct 13 12:59:20 2002) /dev/sd0a on /mnt/database type ffs (rw, asynchronous, local, nodev, nosuid, ctime=Sun Oct 13 12:59:20 2002) ... 

Note that OpenBSD 3.2 and later mounts everything but / nodev and nosuid. Thanks to the systrace mechanism (Chapter 10), setuid programs are not necessary on OpenBSD.