1 | What two components compose a SCSI logical unit? |
Answer: | A task manager and a device server. |
2 | Which SAM addressing construct facilitates communication with an object? |
Answer: | The SAM Port Identifier. |
3 | What is a standards body that defines an address format commonly called? |
Answer: | A Network Address Authority (NAA). |
4 | Which organization assigns organizationally unique identifiers (OUIs)? |
Answer: | The IEEE Registration Authority Committee (RAC). |
5 | If fragmentation occurs, where does it occur? |
Answer: | In a network. |
6 | Is it possible for a network protocol to guarantee that frames or packets will never be dropped? |
Answer: | No. |
7 | Why do most packet-switching technologies support bandwidth reservation schemes? |
Answer: | Because it is possible for some end nodes to be starved of bandwidth or be allotted insufficient bandwidth to sustain acceptable application performance. |
8 | Does the SAM explicitly require in-order delivery of frames or packets composing a SCSI request or response? |
Answer: | No. |
9 | Which term describes tagging of frames transmitted on an ISL to indicate the VLAN or VSAN membership of each frame? |
| |
Answer: | Trunking. |
10 | The X2 and XPAK MSAs derive their electrical specifications from which MSA? |
Answer: | XENPAK. |
11 | What is the maximum operating range of the SPI? |
Answer: | 25m. |
12 | Does the SPI support in-order delivery? |
Answer: | Yes, intrinsically. |
13 | Which fiber-optic connectors are supported by GE? |
Answer: | Duplex SC, MT-RJ and LC. |
14 | What is the maximum operating range of 10GBASE-EW using a normal SMF link? |
Answer: | 30km. |
15 | What is the BER of 1000BASE-T? |
Answer: | 1010. |
16 | What are the /C1/ and /C2/ ordered sets used for in 1000BASE-SX? |
Answer: | Auto-negotiation of link operating parameters. |
17 | An Ethernet MAC address is equivalent to which SAM addressing construct? |
Answer: | The SAM Port Identifier. |
18 | What is the purpose of GVRP? |
Answer: | Dynamic PVID assignment. |
19 | Which Ethernet frame format is most common today? |
Answer: | Ethernet II. |
20 | How many types of service does Ethernet support? |
Answer: | Three. |
21 | Can flow-based load balancing be implemented across an Ethernet port channel? |
Answer: | Yes. |
22 | Do copper-based and fiber-based Ethernet implementations follow the same link initialization procedures? |
Answer: | No. |
23 | What is the most common fiber-optic connector used by 2-Gbps FC devices? |
| |
Answer: | LC. |
24 | What is the maximum operating range of 2-Gbps FC on 62.5 micron MMF? |
Answer: | 150m. |
25 | How many 8B/10B control characters does 4-Gbps FC use? |
Answer: | One. |
26 | What information does the NAA field of an FC WWN provide? |
Answer: | The type of address contained within the Name field and the format of the Name field. |
27 | What do FC attached SCSI initiators do following receipt of an RSCN frame? |
Answer: | Query the FCNS. |
28 | Does the header of a FC frame provide functionality at OSI Layers other the data-link layer? |
Answer: | Yes. |
29 | Which FC CoS is used by default in most FC-SANs? |
Answer: | CoS 3. |
30 | Does FC currently support automation of link aggregation? |
Answer: | No, but some proprietary methods have recently appeared in the market. |
31 | What determines the sequence of events during extended FC link initialization? |
Answer: | The type of devices connected by the link. |