Installing QuArK


All of the parts you will need to install QuArK on your hard drive are included on the companion CD. After installing the program, you'll need to verify the configuration, as described in the following sections.

Using the Installer

When you install QuArK, you will also be installing a stripped-down version of the Python scripting language.

Do the following:

  1. Browse to your CD in the \QuArK directory.

  2. Locate the Setup.exe file and double-click it to run it.

  3. Click the Next button for the Welcome screen.

  4. Follow the various screens, and take the default options for each one, unless you know you have a specific reason to do otherwise.

Note that this is not the official QuArK installer—there isn't any. This installer is only available on the companion CD for this book.

After installation you will have QuArK installed into a directory structure that should look exactly like that in Figure 17.1.

click to expand
Figure 17.1: QuArK directory structure.

Configuration

The installation program will have already ensured that you have the correct configuration for use with this book. However, it's a good idea to double-check the configuration.

  1. Launch QuArK by choosing Start, Programs, 3DGPAi1, QuArK, Launch QuArK.

  2. After the QuArK window appears, choose Edit, Configuration (see Figure 17.2).

    click to expand
    Figure 17.2: QuArK Edit menu.

    The Configuration utility will appear. On the right side is a large blank area where various parameters will appear to be edited, depending on what you choose in the left area, which contains the configuration categories.

  3. Click the Torque category, located in the Games section (see Figure 17.3).

    click to expand
    Figure 17.3: Configuration sections and categories.

    The parameter page for Torque will appear, as shown in Figure 17.4.

    click to expand
    Figure 17.4: Torque configuration page.

  4. Verify the setting of each parameter by checking it against Table 17.1. All parameters not listed in the table should be left blank. Also note that the settings in the first program through the sixth program entries are almost identical, with the only difference being the middle of the three command-line switches in the fixed command-line arguments parameter for each program.

    Table 17.1: Torque Settings for QuArK

    Parameter

    Value

    Torque converter

    map2dif_DEBUG.EXE

    Directory of Torque files

    C:\QuArK 6.3\Torque

    Run these build programs

    selected (in QuArK's console)

    Run tools from base directory

    cleared

    Output Map Format

    Valve 220

    1st program

    program executable (path optional)

    C:\QuArK 6.3\torque\tmpquark\map2dif_DEBUG.exe

    fixed command-line arguments

    -v -h -o ./maps -t ./textures %mapfile%

    2nd program

    program executable (path optional)

    C:\QuArK 6.3\torque\tmpquark\map2dif_DEBUG.exe

    fixed command-line arguments

    -v -l -o ./maps -t ./textures %mapfile%

    3rd program

    program executable (path optional)

    C:\QuArK 6.3\torque\tmpquark\map2dif_DEBUG.exe

    fixed command-line arguments

    -v -p -o ./maps -t ./textures %mapfile%

    4th program

    program executable (path optional)

    C:\QuArK 6.3\torque\tmpquark\map2dif_DEBUG.exe

    fixed command-line arguments

    -v -e -o ./maps -t ./textures %mapfile%

    5th program

    program executable (path optional)

    C:\QuArK 6.3\torque\tmpquark\map2dif_DEBUG.exe

    fixed command-line arguments

    -v -n -o ./maps -t ./textures %mapfile%

    6th program

    program executable (path optional)

    C:\QuArK 6.3\torque\tmpquark\map2dif_DEBUG.exe

    fixed command-line arguments

    -v -g -o ./maps -t ./textures %mapfile%

  5. Close the Configuration utility when you are finished.

Next, let's make something!




3D Game Programming All in One
3D Game Programming All in One (Course Technology PTR Game Development Series)
ISBN: 159200136X
EAN: 2147483647
Year: 2006
Pages: 197

flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net