Exercise 47: Alaska Tours and Such

To configure the network as described, follow these steps:

1.	Start YaST.
2.	Choose Network Devices, and then Network Card.
3.	Click Change, and then Edit, as shown in Figure 4.47. Figure 4.47. Change the settings for the network card.
4.	Click on the radio button Static Address Setup. Enter the static IP address of 192.168.0.14 and Subnet mask of 255.255.255.0.
5.	Click Routing and enter the default gateway address of 192.168.0.1.
6.	Click OK.
7.	Click Next, and then Finish.
8.	Test the configuration by pinging the default gateway and then a host outside the network.