Section 6: DLSw (6 Points)

Section 6: DLSw+ (6 Points)

• Configure DLSw+ with TCP encapsulation between R6-R4 and R6-R5. R4 should only be able to connect to R6 VLAN2 and R5 to VLAN5.

• If the DLSw+ connection from R4-R6 fails, allow R4 to connect to VLAN2 via R1. If the primary connection to R6 is restored, only keep the new connection to VLAN2 active for 60 seconds.

• R4 and R5 should show reachability of NetBIOS name ccie advertised from R6. This is the only NetBIOS name of which R6 should have visibility.