1 | What is the length of an IPv6 address? |
2 | How are IPv6 addresses represented? |
3 | What are the two rules for compacting IPv6 addresses? |
4 | Why is it illegal to use more than one double colon in an IPv6 address? |
5 | What is the difference between the IPv6 addresses ::/0 and ::/128? |
6 | What is the part of the unicast IPv6 address that specifies the host, and what is its length? |
7 | What is the length of the Subnet ID portion of the unicast IPv6 address? |
8 | If the first 10 bits of an IPv6 address are FF80::/10, what type of address is it? |
9 | What type of address is 3FFE:204:100:90::1? |
10 | What is an anycast address? |
11 | What is a multicast address? |
12 | What is the length of the IPv6 header? |
13 | What is the purpose of the Flow Label field in the IPv6 header? |
14 | To what field in the IPv4 header does the IPv6 Next Header field correspond? |
15 | To what field in the IPv4 header does the IPv6 Hop Limit field correspond? |
16 | In what way is the IPv6 Next Header field like the IPv4 Protocol Number field, and in what way is it different? |
17 | How do extension headers make IPv6 packets more efficient? |
18 | What is the Next Header value of ICMPv6? |
19 | What is the significant difference between IPv4 fragmentation and IPv6 fragmentation? |
20 | What are the five ICMPv6 messages used by the Neighbor Discovery Protocol? |
21 | What is the purpose of the M and O flags in the RA? |
22 | What is the purpose of the Reachable Time field of the RA? |
23 | What is the purpose of the Retransmit Timer field in the RA? |
24 | What is indicated if the Router Lifetime field in the RA is set to 0? |
25 | What is the purpose and effect of the S flag in the NA? |
26 | What is the difference between stateful and stateless address autoconfiguration? |
27 | What two steps does MAC-to-EUI64 conversion use to derive an Interface ID? |
28 | When a device acquires a unicast IPv6 address it must perform Duplicate Address Detection, with one exception. What is that exception? |
29 | What does the prefix FF02:0:0:0:0:1:FF00::/104 signify? |
30 | What does IPv6 use in place of ARP and an ARP cache? |
31 | What is a privacy address? |
32 | What does an Incomplete state of an entry in the neighbor cache signify? |
33 | What does a Probe state of an entry in the neighbor cache signify? |
34 | What two ways does Neighbor Unreachability Detection use to verify two-way reachability of a neighbor? |