address-family { ipv4 vpnv4 } { multicast unicast vrf } | Enables MBGP. |
exit-address-family | Marks the end of the MBGP configuration stanzas. |
ip mroute source mask [ protocol as-number ] { rpf-address type number } [ distance ] | Configures a static mroute used for RPF checks. |
ip msdp cache-sa-state [ list access-list-number ] | Enables SA caching. |
ip msdp default-peer ip-address name [ prefix-list list ] | Specifies an MSDP peer from which SA messages are accepted without performing an RPF check. |
ip msdp description { peer-name peer-address } text | Adds descriptive text to an MSDP peer configuration. |
ip msdp filter-sa-request { ip-address name } [ list access-list-number ] | Enables a filter for outgoing SA Request messages. |
ip msdp mesh- group name { ip-address name } | Designates a peer to be a member of a mesh group. SA messages from a mesh group member are not forwarded to other mesh group members . |
ip msdp originator-id type number | Changes the default RP address used in MSDP messages. |
ip msdp peer { peer-name peer-address } [ connect-source type number ] [ remote-as as-number ] | Designates a router as an MSDP peer. |
ip msdp redistribute [ list access-list-name ] [ asn aspath-access-list-number ] [ route-map map ] | Enables a filter for MSDP SA messages originated by the local router. |
ip msdp sa-filter in { ip-address name } [ list access-list-name ] [ route-map map-tag ] | Enables a filter for incoming MSDP SA messages. |
ip msdp sa-filter out { ip-address name } [ list access-list-name ] [ route-map map-tag ] | Enables a filter for outgoing MSDP messages. |
ip msdp sa-request { ip-address name } | Enables an RP to send MSDP SA Request messages to the designated caching peer. |
ip msdp ttl-threshold { ip-address name } ttl | Sets a TTL value for MSDP messages originated by the local router. |
ip multicast boundary access-list-number | Designates an interface as a multicast boundary for administrative scoping. |
ip multicast ttl-threshold ttl-value | Designates an interface as a multicast boundary for TTL scoping. |
neighbor { ip-address name } activate | Specifies an MBGP neighbor to be activated for unicast, multicast, or both. |
no bgp default ipv4-unicast | Disables the default designation of all BGP neighbors as unicast so that unicast neighbors can be individually activated. |
show ip msdp peer peer-address name | Displays detailed information about MSDP peers. |
show ip msdp sa-cache [ group-address source-address group-name source-name ] [ group-address source-address group-name source-name ] [ autonomous-system-number ] | Displays information about SA state cached in the local router. |
show ip msdp summary | Displays summary information about MSDP peers. |