34.

function OpenWin(url, w, h) { if(!w) w = 400; if(!h) h = 300; window.open(url, "_new", "width=" + w + ",height=" + h + ",menubar=no,toobar=no,scrollbars=yes", true); }

Book: LPI Linux Certification in a Nutshell
Section: Chapter 4.  Devices, Linux Filesystems, and the Filesystem Hierarchy Standard (Topic 2.4)



4.2 Objective 2: Maintain the Integrity of Filesystems

Over the course of time, active filesystems can develop problems, such as:

  • A filesystem fills to capacity, causing programs or perhaps the entire system to fail.

  • A filesystem is corrupted, perhaps due to a power failure or system crash.

  • A filesystem runs out of inodes, meaning that new filesystem objects cannot be created.

Carefully monitoring and checking Linux filesystems on a regular basis can help prevent and correct these types of problems.

4.2.1 Monitoring Free Disk Space and Inodes

A read/write filesystem isn't much good if it grows to the point that it won't accept any more files. This could happen if the filesystem fills to capacity or runs out of inodes.

Inodes are the data structures within filesystems that describe files on disk. Every filesystem contains a finite number of inodes, set when the filesystem is created. This number is also the maximum number of files that the filesystem can accommodate. Because filesystems are created with a huge number of inodes, you'll probably never create as many files as it would take to run out of inodes. However, it is possible to run out of inodes if a partition contains many small files.

It is important to prevent space and inode shortages from occurring on system partitions. The df command gives you the information you need on the status of both disk space utilization and inode utilization.

df

Syntax

df [options] [directories]

Description

Display overall disk utilization information for mounted filesystems on directories. Usually, directories are device files for partitions, such as /dev/hda1, but using another file or directory name yields information on the partition that holds the file or directory. If directories are omitted, information for mounted filesystems on all devices in /etc/fstab are displayed.

Frequently used options

-h

Displays results in a human-readable format, including suffixes such as M (megabytes) and G (gigabytes).

-i

Displays information on remaining inodes rather than the default disk space information.

Example 1

Check disk space utilization on all filesystems:

# df -h Filesystem            Size  Used Avail Use% Mounted on /dev/sda1             387M   56M  311M  15% / /dev/sda5             296M  5.2M  276M   2% /boot /dev/sda9             1.9G  406M  1.4G  22% /home /dev/sda6              53M   12M   39M  23% /root /dev/sda10             99M  104k   93M   0% /tmp /dev/sda8             972M  507M  414M  55% /usr /dev/sda7             296M  9.3M  272M   3% /var

This example shows that of the seven filesystems mounted by default, none exceeds 55 percent capacity.

Example 2

Check the same filesystems for inode utilization:

# df -i Filesystem            Inodes   IUsed   IFree IUse% Mounted on /dev/sda1             102800    7062   95738    7% / /dev/sda5              78312      29   78283    0% /boot /dev/sda9             514000     934  513066    0% /home /dev/sda6              14056     641   13415    5% /root /dev/sda10             26104      60   26044    0% /tmp /dev/sda8             257040   36700  220340   14% /usr /dev/sda7              78312     269   78043    0% /var

Among these partitions, the largest consumption of inodes is a mere 14 percent. It is clear that none of the filesystems is anywhere near consuming the maximum number of inodes available. Note that the /usr partition (with 14 percent of inodes used) has used 55 percent of the disk space. With utilization like this, the /usr volume will most likely fill to capacity long before the inodes are exhausted.

Example 3

Quickly determine which partition the current working directory (represented simply by a single dot) is located:

# df . /dev/sda1             102800    7062   95738    7% /

When a filesystem is nearing capacity, files may simply be deleted to make additional space available. However, in the rare case in which an inode shortage occurs, the filesystem must be recreated with a larger number of inodes unless a significant number of files can be deleted.

4.2.2 Monitoring Disk Usage

Have you ever found yourself wondering, "Where did all the disk space go?" Some operating systems make answering this question surprisingly difficult using only native tools. On Linux, the du command can help display disk utilization information on a per-directory basis and perhaps answer that question. du recursively examines directories and reports detailed or summarized information on the amount of space consumed.

du

Syntax

du [options] [directories]

Description

Display disk utilization information for directories. If directories are omitted, the current working directory is searched.

Frequently used options

-a

Shows all files, not just directories.

-c

Produces a grand total for all listed items.

-h

Displays results in a human-readable format, including suffixes such as M (megabytes) and G (gigabytes).

-s

Prints a summary for each of the directories specified, instead of totals for each subdirectory found recursively.

-S

Excludes subdirectories from counts and totals, limiting totals to directories.

Example 1

Examine disk utilization in /etc/rc.d:

# du /etc/rc.d 882     /etc/rc.d/init.d 1       /etc/rc.d/rc0.d 1       /etc/rc.d/rc1.d 1       /etc/rc.d/rc2.d 1       /etc/rc.d/rc3.d 1       /etc/rc.d/rc4.d 1       /etc/rc.d/rc5.d 1       /etc/rc.d/rc6.d 904     /etc/rc.d

Example 2

Display utilization by files in /etc, including subdirectories beneath it:

# du -s /etc 13002   /etc

Example 3

Display utilization by files in /etc, but not in subdirectories beneath it:

# du -Ss /etc 1732    /etc

Example 4

Show a summary of all subdirectories under /home, with human-readable output:

# du -csh /home/* 42k     /home/bsmith 1.5M    /home/httpd 9.5M    /home/jdean 42k     /home/jdoe 12k     /home/lost+found 1.0k    /home/samba 11M     total

This result shows that 11 MB of total disk space is used.

Example 5

Show the same summary, but sort the results to display in order of largest to smallest disk utilization:

# du -cs /home/* | sort -nr 11386   total 9772    jdean 1517    httpd 42      jdoe 42      bsmith 12      lost+found 1       samba

This result shows that user jdean is consuming the largest amount of space. Note that the human-readable format does not sort in this way, since sort is unaware of the human-readable size specifications.

4.2.3 Checking Filesystem Integrity

No matter how stable, computers do fail, even due to something as simple as a power cable being accidentally unplugged. Unfortunately, such an interruption can make a mess of a filesystem. If a disk write operation is aborted before it completes, the data in transit could be lost, and the portions of the disk that were allocated for it are left marked as used. In addition, filesystem writes are cached in memory, and a power loss or other crash prevents the kernel from synchronizing the cache with the disk. Both of these scenarios lead to inconsistencies in the filesystem and must be corrected to ensure reliable operation.

Filesystems are checked with fsck. Like mkfs, fsck is a front-end to filesystem- specific utilities -- including fsck.ext2, which is a link to the e2fsck program (see its manpage for detailed information).

Part of the information written on disk to describe a filesystem is known as the superblock, written in block 1 of the partition. If this area of the disk is corrupted, the filesystem is inaccessible. Because the superblock is so important, copies of it are made in the filesystem at regular intervals, by default every 8192 blocks. The first superblock copy is located at block 8193, the second copy is at block 16385, and so on. As you'll see, fsck can use the information in the superblock copies to restore the main superblock.

fsck

Syntax

fsck [options] [-t type] [fs-options] filesystems

Description

Check filesystems for errors and optionally correct them. By default, fsck assumes the ext2 filesystem type and runs interactively, pausing to ask for permission before applying fixes.

Frequently used options for fsck

-A

Run checks on all filesystems specified in /etc/fstab. This option is intended for use at boot time, before filesystems are mounted.

-N

Don't execute, but show what would be done.

-t type

Specify the type of filesystem to check; the default is ext2. The value of type determines which filesystem-specific checker is called.

Frequently used options for e2fsck

-b superblock

Use an alternative copy of the superblock. In interactive mode, e2fsck automatically uses alternative superblocks. Typically, you'll try -b 8193 in non-interactive mode to restore a bad superblock.

-c

Check for bad blocks.

-f

Force a check, even if the filesystem looks clean.

-p

Automatically repair the filesystem without prompting.

-y

Answers "yes" to all interactive prompts, allowing e2fsck to be used noninteractively.

Example 1

Check the ext2 filesystem on /dev/hda5, which is not mounted:

# fsck /dev/hda5 [/sbin/fsck.ext2 -- ] fsck.ext2 /dev/hda5 Parallelizing fsck version 1.14 (9-Jan-1999) e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09 /dev/hda5: clean, 1011/34136 files, 4360/136521 blocks

The partition was clean, so fsck didn't really check it.

Example 2

Force a check:

# fsck -f /dev/hda5 Parallelizing fsck version 1.14 (9-Jan-1999) e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09 Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/hda5: 1011/34136 files (0.1% non-contiguous),     4360/136521 blocks

Example 3

Force another check, this time with verbose output:

# fsck -fv /dev/hda5 Parallelizing fsck version 1.14 (9-Jan-1999) e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09 Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information     1011 inodes used (2%)        1 non-contiguous inodes (0.1%)          # of inodes with ind/dind/tind blocks: 0/0/0     4360 blocks used (3%)        0 bad blocks     1000 regular files        2 directories        0 character device files        0 block device files        0 fifos        0 links        0 symbolic links (0 fast symbolic links)        0 sockets --------     1002 files

Example 4

Allow fsck to automatically perform all repairs on a damaged filesystem by specifying the -y option to run the command automatically:

[root@smp /mnt]# fsck -y /dev/hda5 Parallelizing fsck version 1.14 (9-Jan-1999) e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09 Couldn't find ext2 superblock, trying backup blocks... /dev/hda5 was not cleanly unmounted, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Block bitmap differences:  +1 +2 +3 +4 Fix? yes Inode bitmap differences:  +1 +2 +3 +4 +5 +6 Fix? yes /dev/hda5: ***** FILE SYSTEM WAS MODIFIED ***** /dev/hda5: 1011/34136 files (0.1% non-contiguous),     4360/136521 blocks

When Linux boots, the kernel performs a check of all filesystems in /etc/fstab using the -A option to fsck.[4] Any filesystems that were not cleanly unmounted are checked. If that check finds any significant errors, the system drops into single-user mode so you can run fsck manually. Unfortunately, unless you have detailed knowledge of the inner workings of the filesystem, there's little you can do other than to have fsck do all of the repairs. As a result, it is common to use the -y option and hope for the best.

[4] Unless the /etc/fstab entry contains the noauto option.

On the Exam

Familiarity with du, df, and fsck is important. Be sure you understand the differences between the commands and when each is used.

 


LPI Linux Certification in a Nutshell
LPI Linux Certification in a Nutshell (In a Nutshell (OReilly))
ISBN: 0596005288
EAN: 2147483647
Year: 2000
Pages: 194

flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net