Section C.8. Configure Studio Server for Remote Debugger and Profiling

C.8. Configure Studio Server for Remote Debugger and Profiling

For security reasons, in order to use the Studio Server for Remote Debugger and Profiler, the user must first be configured as an authorized user on the Zend Server Center. Only authorized IP addresses can access the Zend Server Center. All other IP addresses will be denied access.

To define an allowed user:

1.	Log on to Zend Server Center as Administrator from a permitted IP address.
2.	Open the Security Settings screen.
3.	In the Manage IP Permissions tab, add the IP address that you want to allow to access the Remote Debugger to the Allowed Host List.
4.	Verify that the IP address you want to allow to access the Remote Debugger does not appear on the Denied Host List. (If it is on the Denied Host List, remove it.)
5.	Click OK.
6.	Restart the web server. When the web server restarts, the Studio Client at this IP address will be able to access the Remote Debugger.

Note

Access in Zend Studio is handled by a two-stage verification process. Only when an IP address passes both stagesfor example, it is allowed and it is not deniedcan it then access debugging services.

Note

You can also configure the Debugger's access list through the zend_debugger.allow_hosts and zend_debugger.deny_hosts php.ini directives.