Section 10.7. ETSI (European Telecommunications Standards Institute)

10.7. ETSI (European Telecommunications Standards Institute)

ETSI is an independent, nonprofit organization in Europe whose mission is to develop telecommunications standards for today and for the future.

The following ETSI standards are relevant to RFID:

• ETSI TR 101 445 V1.1.1 (2002-04). Electromagnetic Compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) intended for operation in the 862 MHz to 870 MHz band; System Reference Document for radio frequency identification (RFID) equipment.

• ETSI I-ETS 300 220 ed.1 (1993-10). Radio Equipment and Systems (RES); Short Range Devices (SRD); Technical characteristics and test methods for radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW. This is currently composed of the following three parts:

  Part 1. V1.3.1 (2000-09). Technical characteristics and test methods

  Part 2. V1.2.1 (1997-11). Supplementary parameters not intended for regulatory purposes

  Part 3. V1.1.1 (2000-09). Harmonised EN covering essential requirements under article 3.2 of the R&TTE Directive

• ETSI EN 300 330 V1.2.2 (1999-05). ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics and test methods for radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 KHz to 30 MHz. This is currently composed of the following two parts:

  Part 1. V1.4.1 (2004-11). Technical characteristics and test methods

  Part 1. V1.2.1 (2004-11). Harmonised EN under article 3.2 of the R&TTE Directive

• ETSI I-ETS 300 440/C1 ed.1 (1996-04). Radio Equipment and Systems (RES); Short Range Devices (SRD); Technical characteristics and test methods for radio equipment to be used in the 1 GHz to 25 GHz frequency range. This is currently composed of the following two parts:

  ETSI EN 300 440-1 V1.3.1 (2001-09). Technical characteristics and test methods

  ETSI EN 300 440-2 V1.1.2 (2004-07). Harmonised EN under article 3.2 of the R&TTE Directive

• ETSI EN 300 674 V1.1.1 (1999-02). Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Technical characteristics and test methods for Dedicated Short Range Communication (DSRC) transmission equipment (500 kbps / 250 kbps) operating in the 5,8 GHz Industrial, Scientific, and Medical (ISM) band. This is currently composed of the following two parts:

  ETSI EN 300 674-1 V1.2.1 (2004-08). General characteristics and test methods for Road Side Units (RSU) and On-Board Units (OBU)

  ETSI EN 300 674-2-1 V1.1.1 (2004-08). Harmonised EN under article 3.2 of the R&TTE Directive

• ETSI ETS 300 683 ed.1 (1997-06). Radio Equipment and Systems (RES); Electro-Magnetic Compatibility (EMC) standard for Short Range Devices (SRD) operating on frequencies between 9 KHz and 25 GHz.

• ETSI EN 300 761 V1.1.1 (1998-01). Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Automatic Vehicle Identification (AVI) for railways. This is currently composed of the following two parts:

  ETSI EN 300 761-1 V1.2.1 (2001-06). Technical characteristics and methods of measurement

  ETSI EN 300 761-2 V1.1.1 (2001-06). Harmonised standard covering essential requirements under article 3.2 of the R&TTE Directive

• ETSI EN 301 489. Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. This is currently composed of the following 30 parts:

  ETSI EN 301 489-1 V1.5.1 (2004-11). Common technical requirements

  ETSI EN 301 489-2 V1.3.1 (2002-08). Specific conditions for radio paging equipment

  ETSI EN 301 489-3 V1.4.1 (2002-08). Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 KHz and 40 GHz

  ETSI EN 301 489-4 V1.3.1 (2002-08). Specific conditions for fixed radio links and ancillary equipment and services

  ETSI EN 301 489-5 V1.3.1 (2002-08). Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and nonspeech)

  ETSI EN 301 489-6 V1.2.1 (2002-08). Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment

  ETSI EN 301 489-7 V1.2.1 (2002-08). Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)

  ETSI EN 301 489-8 V1.2.1 (2002-08). Specific conditions for GSM base stations

  ETSI EN 301 489-9 V1.3.1 (2002-08). Specific conditions for wireless microphones, similar radio frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices

  ETSI EN 301 489-10 V1.3.1 (2002-08). Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment

  ETSI EN 301 489-11 V1.2.1 (2002-11). Specific conditions for terrestrial sound broadcasting service transmitters

  ETSI EN 301 489-12 V1.2.1 (2003-05). Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)

  ETSI EN 301 489-13 V1.2.1 (2002-08). Specific conditions for Citizens' Band (CB) radio and ancillary equipment (speech and nonspeech)

  ETSI EN 301 489-14 V1.2.1 (2003-05). Specific conditions for analog and digital terrestrial TV broadcasting service transmitters

  ETSI EN 301 489-15 V1.2.1 (2002-08). Specific conditions for commercially available amateur radio equipment

  ETSI EN 301 489-16 V1.2.1 (2002-08). Specific conditions for analog cellular radio communications equipment, mobile and portable

  ETSI EN 301 489-17 V1.2.1 (2002-08). Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high-performance RLAN equipment

  ETSI EN 301 489-18 V1.3.1 (2002-08). Specific conditions for Terrestrial Trunked Radio (TETRA) equipment

  ETSI EN 301 489-19 V1.2.1 (2002-11). Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications

  ETSI EN 301 489-20 V1.2.1 (2002-11). Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)

  ETSI EN 301 489-22 V1.1.1 (2003-11). Specific conditions for ground-based VHF aeronautical mobile and fixed radio equipment

  ETSI EN 301 489-23 V1.2.1 (2002-11). Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) Base Station (BS) radio, repeater and ancillary equipment

  ETSI EN 301 489-24 V1.2.1 (2002-11). Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment

  ETSI EN 301 489-25 V2.3.2 (2004-07). Specific conditions for CDMA 1x Spread Spectrum Mobile Stations and ancillary equipment

  ETSI EN 301 489-26 V2.3.2 (2004-07). Specific conditions for CDMA 1x Spread Spectrum Base Stations, repeaters and ancillary equipment

  ETSI EN 301 489-27 V1.1.1 (2004-06). Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)

  ETSI EN 301 489-28 V1.1.1 (2004-09). Specific conditions for wireless digital video links

  ETSI EN 301 489-31 V1.1.1 (2004-11). Specific conditions for equipment in the 9 to 315 KHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)

  ETSI EN 301 489-32 V1.1.1 (2004-11). Specific conditions for Ground and Wall Probing Radar applications

  ETSI EN 301 489-28 V1.1.1 (2004-09). Specific conditions for wireless digital video links