Windows API Guide: MM_MCINOTIFY Message | Windows API Guide - Reference - Volume 1: Version 3.0 For the MS-DOS and PC-DOS Operating Systems

The error codes are values that identify different types of errors in the Windows API. Most functions do not report the error code directly; instead, they simply return a flag specifying if some error occured or not. The actual error code can usually be obtained by using the GetLastError function.

The following list identifies various error codes defined in the Windows API. Your application may define its own error codes and use them with the error functions. However, make sure that bit 29 (&H20000000) is set in any application-defined error code you define. Because no Windows API-defined error code has that bit set, using that bit assures that your error code will not conflict with an existing one.

Error Codes

NO_ERROR: No Error / Success.
ERROR_SUCCESS: No Error / Success.
ERROR_INVALID_FUNCTION: Incorrect function.
ERROR_FILE_NOT_FOUND: The system cannot find the file specified.
ERROR_PATH_NOT_FOUND: The system cannot find the path specified.
ERROR_TOO_MANY_OPEN_FILES: The system cannot open the file because too many files are currently open.
ERROR_ACCESS_DENIED: Access denied.
ERROR_INVALID_HANDLE: The handle is invalid.
ERROR_ARENA_TRASHED: The storage control blocks were destroyed.
ERROR_NOT_ENOUGH_MEMORY: Insufficient memory is available to process the command.
ERROR_INVALID_BLOCK: The storage control block address is invalid.
ERROR_BAD_ENVIRONMENT: The environment is incorrect.
ERROR_BAD_FORMAT: An attempt to load a program with an incorrect format was made.
ERROR_INVALID_ACCESS: The access code is invalid.
ERROR_INVALID_DATA: The data are invalid.
ERROR_OUTOFMEMORY: Insufficient memory is available to complete the operation.
ERROR_INVALID_DRIVE: The system cannot find the drive specified.
ERROR_CURRENT_DIRECTORY: The directory cannot be removed.
ERROR_NOT_SAME_DEVICE: The system cannot move the file to a different disk drive.
ERROR_NO_MORE_FILES: There are no more files.
ERROR_WRITE_PROTECT: The disk is write protected.
ERROR_BAD_UNIT: The system cannot find the device specified.
ERROR_NOT_READY: The device is not ready.
ERROR_BAD_COMMAND: The device does not recognize the command.
ERROR_CRC: Cyclic redundance check (CRC) data error.
ERROR_BAD_LENGTH: The length of the issued command is incorrect.
ERROR_SEEK: The drive cannot locate a specific area or track on the disk.
ERROR_NOT_DOS_DISK: The specified disk cannot be accessed.
ERROR_SECTOR_NOT_FOUND: The drive cannot find the sector requested.
ERROR_OUT_OF_PAPER: The printer is out of paper.
ERROR_WRITE_FAULT: The system cannot write to the specified device.
ERROR_READ_FAULT: The system cannot read from the specified device.
ERROR_GEN_FAILURE: A device attached to the system is not functioning.
ERROR_SHARING_VIOLATION: The file cannot be accessed because it is in use by another process.
ERROR_LOCK_VIOLATION: The file cannot be accessed because another process has locked a portion of it.
ERROR_WRONG_DISK: The wrong disk is in the drive.
ERROR_SHARING_BUFFER_EXCEEDED: Too many files have been opened for sharing.
ERROR_HANDLE_EOF: The end of file (EOF) has been reached.
ERROR_HANDLE_DISK_FULL: The disk is full.
ERROR_NOT_SUPPORTED: The network request is not supported.
ERROR_REM_NOT_LIST: The remote computer is not available.
ERROR_DUP_NAME: A duplicate name exists on the network.
ERROR_BAD_NETPATH: The network path was not found.
ERROR_NETWORK_BUSY: The network is busy.
ERROR_DEV_NOT_EXIST: The specified network resource or device is not available.
ERROR_TOO_MANY_CMDS: The network BIOS command limit has been reached.
ERROR_ADAP_HDW_ERR: A network adapter hardware error has occured.
ERROR_BAD_NET_RESP: The specified server cannot perform the requested operation.
ERROR_UNEXP_NET_ERROR: An unexpected network error has occured.
ERROR_BAD_REM_ADAP: The remote adapter is incompatible.
ERROR_PRINTQ_FULL: The printer queue is full.
ERROR_NO_SPOOL_SPACE: No space to store the file waiting to be printed is available on the server.
ERROR_PRINT_CANCELLED: The file waiting to be printed was deleted.
ERROR_NETNAME_DELETED: The specified network name is unavailable.
ERROR_NETWORK_ACCESS_DENIED: Network access is denied.
ERROR_BAD_DEV_TYPE: The network resource type is incorrect.
ERROR_BAD_NET_NAME: The network name cannot be found.
ERROR_TOO_MANY_NAMES: The name limit for the local computer network adapter card was exceeded.
ERROR_TOO_MANY_SESS: The network BIOS session limit was exceeded.
ERROR_SHARING_PAUSED: The remote server is paused or is in the process of beig started.
ERROR_REQ_NOT_ACCEP: The network request was not accepted.
ERROR_REDIR_PAUSED: The specified printer or disk device is paused.
ERROR_FILE_EXISTS: The file exists.
ERROR_CANNOT_MAKE: The directory or file cannot be created.
ERROR_FAIL_I24: Failure on Interrupt 24 (INT 24).
ERROR_OUT_OF_STRUCTURES: Storage to process the request is unavailable.
ERROR_ALREADY_ASSIGNED: The local device name is already in use.
ERROR_INVALID_PASSWORD: The specified network password is incorrect.
ERROR_INVALID_PARAMETER: The parameter is incorrect.
ERROR_NET_WRITE_FAULT: A write fault occured on the network.
ERROR_NO_PROC_SLOTS: The system cannot start another process at this time.
ERROR_TOO_MANY_SEMAPHORES: The system cannot create another semaphore.
ERROR_EXCL_SEM_ALREADY_OWNED: The exclusive semaphore is already owned by another process.
ERROR_SEM_IS_SET: The semaphore is set and cannot be closed.
ERROR_TOO_MANY_SEM_REQUESTS: The semaphore cannot be set again.
ERROR_INVALID_AT_INTERRUPT_TIME: The system cannot request exclusive semaphores at interrupt time.
ERROR_SEM_OWNER_DIED: The previous ownership of this semaphore has ended.
ERROR_SEM_USER_LIMIT: The system has reached the semaphore user limit.
ERROR_DISK_CHANGE: The program stopped because the alternate disk was not inserted.
ERROR_DRIVE_LOCKED: The disk is in use or is locked by another process.
ERROR_BROKEN_PIPE: The pipe has been ended.
ERROR_OPEN_FAILED: The system cannot open the device or file specified.
ERROR_BUFFER_OVERFLOW: The file name is too long.
ERROR_DISK_FULL: There is insufficient space on the disk.
ERROR_NO_MORE_SEARCH_HANDLES: No more file search handles are available.
ERROR_INVALID_TARGET_HANDLE: The target file handle is incorrect.
ERROR_INVALID_CATEGORY: The IOCTL call made by the program is incorrect.
ERROR_INVALID_VERIFY_SWITCH: The verify-on-write parameter is incorrect.
ERROR_BAD_DRIVER_LEVEL: The system does not support the command requested.
ERROR_CALL_NOT_IMPLEMENTED: This function is only valid under Windows NT/2000.
ERROR_SEM_TIMEOUT: The semaphore timeout experiod has expired.
ERROR_INSUFFIENT_BUFFER: The data area passed to a system call is too small.
ERROR_INVALID_NAME: The syntax of the filename, directory name, or volume label is incorrect.
ERROR_INVALID_LEVEL: The system call level is incorrect.
ERROR_NO_VOLUME_LABEL: The disk has no volume label.
ERROR_MOD_NOT_FOUND: The specified module cannot be found.
ERROR_PROC_NOT_FOUND: The specified procedure cannot be found.
ERROR_WAIT_NO_CHILDREN: There are no child processes to wait for.
ERROR_CHILD_NOT_COMPLETE: The program cannot run under Windows NT/2000.
ERROR_DIRECT_ACCESS_HANDLE: A file handle or open disk partition was attempted to be used for an operation other than raw disk I/O.
ERROR_NEGATIVE_SEEK: An attempt was made to move a file pointer before the beginning of the file.
ERROR_SEEK_ON_DEVICE: The file pointer cannot be set on the specified device or file.
ERROR_IS_JOIN_TARGET: A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
ERROR_IS_JOINED: An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
ERROR_IS_SUBSTED: An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
ERROR_NOT_JOINED: The system tried to delete the JOIN of a drive that is not joined.
ERROR_NOT_SUBSTED: The system tried to delete the SUBST of a drive that is not substituted.
ERROR_JOIN_TO_JOIN: The system tried to JOIN a drive to a directory on a joined drive.
ERROR_SUBST_TO_SUBST: The system tried to SUBST a drive to a directory on a substituted drive.
ERROR_JOIN_TO_SUBST: The system tried to JOIN a drive to a directory on a substituted drive.
ERROR_SUBST_TO_JOIN: The system tried to SUBST a drive to a directory on a joined drive.
ERROR_BUSY_DRIVE: The system cannot perform a JOIN or SUBST at this time.
ERROR_SAME_DRIVE: The system cannot JOIN or SUBST a drive to or for a directory on the same drive.
ERROR_DIR_NOT_ROOT: The directory is not a subdirectory of the root directory.
ERROR_DIR_NOT_EMPTY: The directory is not empty.
ERROR_IS_SUBST_PATH: The path specified is being used in a SUBST.
ERROR_IS_JOIN_PATH: The path specified is being used in a JOIN.
ERROR_PATH_BUSY: The path specified cannot be used at this time.
ERROR_IS_SUBST_TARGET: An attempt was made to JOIN or SUBST a drive for which a directory on the drive is the target of a previous SUBST.
ERROR_SYSTEM_TRACE: System trace information was not specified in CONFIG.SYS, or tracing is not allowed.
ERROR_INVALID_EVENT_COUNT: The number of specified semaphore events is incorrect.
ERROR_TOO_MANY_MUXWAITERS: DosMuxSemWait did not execute because too many semaphores are already set.
ERROR_INVALID_LIST_FORMAT: The DosMuxSemWait list is incorrect.
ERROR_LABEL_TOO_LONG: The volume label specified is too long and was truncated to 11 characters.
ERROR_TOO_MANY_TCBS: The system cannot create another thread.
ERROR_SIGNAL_REFUSED: The recipient process has refused the signal.
ERROR_DISCARDED: The segment is already discarded and cannot be locked.
ERROR_NOT_LOCKED: The segment is already unlocked.
ERROR_BAD_THREADID_ADDR: The address for the thread ID is incorrect.
ERROR_BAD_ARGUMENTS: The argument string is incorrect.
ERROR_BAD_PATHNAME: The specified path is invalid.
ERROR_SIGNAL_PENDING: A signal is already pending.
ERROR_MAX_THRDS_REACHED: No more threads can be created in the system.
ERROR_LOCK_FAILED: The system was unable to lock a region of a file.
ERROR_BUSY: The requested resource is in use.
ERROR_CANCEL_VIOLATION: A lock request was not outstanding for the supplied cancel region.
ERROR_ATOMIC_LOCKS_NOT_SUPPORTED: The file system does not support atomic changes to the lock type.
ERROR_INVALID_SEGMENT_NUMBER: The system detected an incorrect segment number.
ERROR_INVALID_ORDINAL: The system cannot run something because of an invalid ordinal.
ERROR_ALREADY_EXISTS: The system cannot create a file when it already exists.
ERROR_INVALID_FLAG_NUMBER: An incorrect flag was passed.
ERROR_SEM_NOT_FOUND: The specified system semaphore name was not found.
ERROR_INVALID_STARTING_CODESEG: The system cannot run something because of an invalid starting code segment.
ERROR_INVALID_STACKSEG: The system cannot run something because of an invalid stack segment.
ERROR_INVALID_MODULETYPE: The system cannot run something because of an invalid module type.
ERROR_INVALID_EXE_SIGNATURE: The system cannot run something because it cannot run under Windows NT/2000.
ERROR_EXE_MARKED_INVALID: The system cannot run something because the EXE was marked as invalid.
ERROR_BAD_EXE_FORMAT: The system cannot run something because it is an invalid Windows NT/2000 application.
ERROR_ITERATED_DATA_EXCEEDS_64K: The system cannot run something because the iterated data exceed 64KB.
ERROR_INVALID_MINALLOCSIZE: The system cannot run something because of an invalid minimum allocation size.
ERROR_DYNLINK_FROM_INVALID_RING: The system cannot run something because of a dynalink from an invalid ring.
ERROR_IOPL_NOT_ENABLED: The system is not presently configured to run this application.
ERROR_INVALID_SEGDPL: The system cannot run something because of an invalid segment DPL.
ERROR_AUTODATASEG_EXCEEDS_64KB: The system cannot run something because the automatic data segment exceeds 64K.
ERROR_RING2SEG_MUST_BE_MOVABLE: The code segment cannot be greater than or equal to 64KB.
ERROR_RELOC_CHAIN_XEEDS_SEGLIM: The system cannot run something because the reallocation chain exceeds the segment limit.
ERROR_INFLOOP_IN_RELOC_CHAIN: The system cannot run something because of an infinite loop in the reallocation chain.
ERROR_ENVVAR_NOT_FOUND: The system could not find the specified environment variable.
ERROR_NO_SIGNAL_SENT: No process in the command subtree has a signal handler.
ERROR_FILENAME_EXCED_RANGE: The filename or extension is too long.
ERROR_RING2_STACK_IN_USE: The ring 2 stack is busy.
ERROR_META_EXPANSION_TOO_LONG: The global filename characters (or ?) are entered incorrectly, or too amny global filename characters are specified.
ERROR_INVALID_SIGNAL_NUMBER: The signal being posted is incorrect.
ERROR_THREAD_1_INACTIVE: The signal handler cannot be set.
ERROR_LOCKED: The segment is locked and cannot be reallocated.
ERROR_TOO_MANY_MODULES: Too many dynamic link modules are attacked to this program or module.
ERROR_NESTING_NOT_ALLOWED: Nesting of calls to LoadModule is not allowed.
ERROR_BAD_PIPE: The pipe state is invalid.
ERROR_PIPE_BUSY: All pipe instances are busy.
ERROR_NO_DATA: The pipe is being closed.
ERROR_PIPE_NOT_CONNECTED: No process exists on the other end of the pipe.
ERROR_MORE_DATA: More data is available.
ERROR_VC_DISCONNECTED: The session was cancelled.
ERROR_INVALID_EA_NAME: The specified extended attribute name was invalid.
ERROR_EA_LIST_INCONSISTENT: The extended attributes are inconsistent.
ERROR_NO_MORE_ITEMS: No more data is available.
ERROR_CANNOT_COPY: The Copy API cannot be used.
ERROR_DIRECTORY: The directory name is invalid.
ERROR_EAS_DIDNT_FIT: The extended attributes did not fit into the buffer.
ERROR_EA_FILE_CORRUPT: The extended attribute file on the mounted file system is corrupt.
ERROR_EA_TABLE_FULL: The extended attribute table file is full.
ERROR_INVALID_EA_HANDLE: The specified extended attribute handle is invalid.
ERROR_EAS_NOT_SUPPORTED: The mounted file system does not support extended attributes.
ERROR_NOT_OWNER: The system attempted to release a mutex not owned by the caller.
ERROR_TOO_MANY_POSTS: Too many posts were made to a semaphore.
ERROR_MR_MID_NOT_FOUND: The system cannot find the message for the specified message number in the proper message file.
ERROR_INVALID_ADDRESS: The system attempted to access an invalid address.
ERROR_ARITHMETIC_OVERFLOW: An arithmetic overflow (result> 32 bits) occured.
ERROR_PIPE_CONNECTED: A process already exists on the other end of the pipe.
ERROR_PIPE_LISTENING: The system is waiting for a process to open on the other end of the pipe.
ERROR_EA_ACCESS_DENIED: Access to the extended attribute was denied.
ERROR_OPERATED_ABORTED: The I/O operation has been aborted because of either a thread exit or an application request.
ERROR_IO_INCOMPLETE: The overlapped I/O event is not in a signalled state.
ERROR_IO_PENDING: The overlapped I/O operation is in progress.
ERROR_NOACCESS: An invalid access to a memory location was attempted.
ERROR_SWAPERROR: An error performing an inpage operation occured.
ERROR_STACK_OVERFLOW: The stack overflowed because recursion was too deep.
ERROR_INVALID_MESSAGE: The window cannot act on the sent message.
ERROR_CAN_NOT_COMPLETE: The function cannot be completed.
ERROR_INVALID_FLAGS: Invalid flags were used.
ERROR_UNRECOGNIZED_VOLUME: The disk volume does not contain a recognized file system.
ERROR_FILE_INVALID: The disk volume for a file has been altered such that the opened file is no longer valid.
ERROR_FULLSCREEN_MODE: The requested operation cannot be performed in full-screen mode.
ERROR_NO_TOKEN: An attempt to reference a nonexistent token was made.
ERROR_BADDB: The registry database is corrupt.
ERROR_BADKEY: The registry key is invalid.
ERROR_CANTOPEN: The registry key could not be opened.
ERROR_CANTREAD: The registry key could not be read from.
ERROR_CANTWRITE: The registry key could not be written to.
ERROR_REGISTRY_RECOVERED: One of the registry database files was successfully recovered.
ERROR_REGISTRY_CORRUPT: The registry is corrupt. The cause could be a corrupted registry database file, a corrupted image in system memory, or a failed attempt to recover the registry because of a missing or corrupted log.
ERROR_REGISTRY_IO_FAILED: An I/O operation initiated by the registry failed unrecoverably.
ERROR_NOT_REGISTRY_FILE: The system tried to load or restore a file into the registry, but that file is not in the proper file format.
ERROR_KEY_DELETED: An illegal operation was attempted on a registry key marked for deletion.
ERROR_NO_LOG_SPACE: The system could not allocate the required space in a registry log.
ERROR_KEY_HAS_CHILDREN: A symbolic link in a registry key that already has subkeys or values cannot be created.
ERROR_CHILD_MUST_BE_VOLATILE: A stable subkey cannot be created under a volatile parent key.
ERROR_NOTIFY_ENUM_DIR: Because a notify change request is being completed and the information is not being returned in the caller's buffer, the caller must now enumerate the files to find the changes.
ERROR_DEPENDENT_SERVICES_RUNNING: A stop control has been sent to a service which other running services are dependent on.
ERROR_INVALID_SERVICE_CONTROL: The requested control is not valid for this service.
ERROR_SERVICE_REQUEST_TIMEOUT: The service did not respond to the start or control request within the timeout period.
ERROR_SERVICE_NO_THREAD: A thread could not be created for the service.
ERROR_SERVICE_DATABASE_LOCKED: The service database is locked.
ERROR_SERVICE_ALREADY_RUNNING: An instance of the service is already running.
ERROR_INVALID_SERVICE_ACCOUNT: The account name for the service is invalid or nonexistent.
ERROR_SERVICE_DISABLED: The specified service is disabled and cannot be started.
ERROR_CIRCULAR_DEPENDENCY: A circular service dependency was specified.
ERROR_SERVICE_DOES_NOT_EXIST: The specified service does not exist.
ERROR_SERVICE_CANNOT_ACCEPT_CTRL: The service cannot accept control messages at this time.
ERROR_SERVICE_NOT_ACTIVE: The service has not been started.
ERROR_FAILED_SERVICE_CONTROLLER_CONNECT: The service process could not connect to the service controller.
ERROR_EXCEPTION_IN_SERVICE: An exception occured in the service when handling the control request.
ERROR_DATABASE_DOES_NOT_EXIST: The specified database does not exist.
ERROR_SERVICE_SPECIFIC_ERROR: The service has returned a service-specific error code.
ERROR_PROCESS_ABORTED: The process terminated unexpectedly.
ERROR_SERVICE_DEPENDENCY_FAIL: The dependency service or group failed to start.
ERROR_SERVICE_LOGON_FAILED: The service did not start due to a logon failure.
ERROR_SERVICE_START_HANG: After starting, the service hung in a start-pending state.
ERROR_INVALID_SERVICE_LOCK: The specified service database lock is invalid.
ERROR_SERVICE_MARKED_FOR_DELETE: The specified service has been marked for deletion.
ERROR_SERVICE_EXISTS: The specified service already exists.
ERROR_ALREADY_RUNNING_LKG: The system is currently running with the last-known-good configuration.
ERROR_SERVICE_DEPENDENCY_DELETED: The dependency service does not exist or has been marked for deletion.
ERROR_BOOT_ALREADY_ACCEPTED: The current boot has already been accepted for use as the last-known-good control set.
ERROR_SERVICE_NEVER_STARTED: No attempts to start the service have been made.
ERROR_DUPLICATE_SERVICE_NAME: The name is already in use either as a service name or as a service display name.
ERROR_END_OF_MEDIA: The physical end of the tape has been reached.
ERROR_FILEMARK_DETECTED: A tape access reached a filemark.
ERROR_BEGINNING_OF_MEDIA: The beginning of the tape or partition was encountered.
ERROR_SETMARK_DETECTED: A tape access reached the end of a set of files.
ERROR_NO_DATA_DETECTED: No more data is on the tape.
ERROR_PARTITION_FAILURE: The tape could not be partitioned.
ERROR_INVALID_BLOCK_LENGTH: When accessing a new tape of a multivolume partition, the current blocksize is incorrect.
ERROR_DEVICE_NOT_PARTITIONED: The tape partition information could not be found.
ERROR_UNABLE_TO_LOCK_MEDIA: The system was unable to lock the media eject mechanism.
ERROR_UNABLE_TO_UNLOAD_MEDIA: The system was unable to unload the media.
ERROR_MEDIA_CHANGED: The media in the drive may have changed.
ERROR_BUS_RESET: The I/O bus was reset.
ERROR_NO_MEDIA_IN_DRIVE: There is no media in the drive.
ERROR_NO_UNICODE_TRANSLATION: No mapping for the Unicode character exists in the target multi-byte code page.
ERROR_DLL_INIT_FAILED: A dynamic link library initialization routine failed.
ERROR_SHUTDOWN_IN_PROGRESS: A system shutdown is in progress.
ERROR_NO_SHUTDOWN_IN_PROGRESS: The system shutdown could not be aborted because no shutdown is in progress.
ERROR_IO_DEVICE: The request could not be performed because of an device I/O error.
ERROR_SERIAL_NO_DEVICE: No serial device was successfully initialized; the serial driver will therefore unload.
ERROR_IRQ_BUSY: The system was unable to open a device sharing an interrupt request (IRQ) with other device(s) because at least one of those devices is already opened.
ERROR_MORE_WRITES: A serial I/O operation was completed by another write to the serial port.
ERROR_COUNTER_TIMEOUT: A serial I/O operation completed because the time-out period expired.
ERROR_FLOPPY_ID_MARK_NOT_FOUND: No ID address mark was found on the floppy disk.
ERROR_FLOPPY_WRONG_CYLINDER: A mismatch exists between the floppy disk sector ID field and the floppy disk controller track address.
ERROR_FLOPPY_UNKNOWN_ERROR: The floppy disk controller reported an unrecognized error.
ERROR_FLOPPY_BAD_REGISTERS: The floppy disk controller returned inconsistent results in its registers.
ERROR_DISK_RECALIBRATE_FAILED: While accessing a hard disk, a recalibrate operation failed, even after retries.
ERROR_DISK_OPERATION_FAILED: While accessing a hard disk, a disk operation failed, even after retries.
ERROR_DISK_RESET_FAILED: While accessing a hard disk, a disk controller reset was needed, but even that failed.
ERROR_EOM_OVERFLOW: An EOM overflow occured.
ERROR_NOT_ENOUGH_SERVER_MEMORY: Not enough server storage is available to process this command.
ERROR_POSSIBLE_DEADLOCK: A potential deadlock condition has been detected.
ERROR_MAPPED_ALIGNMENT: The base address or the file offset specified does not have the proper alignment.

Constant Definitions

Const NO_ERROR = 0 Const ERROR_SUCCESS = 0 Const ERROR_INVALID_FUNCTION = 1 Const ERROR_FILE_NOT_FOUND = 2 Const ERROR_PATH_NOT_FOUND = 3 Const ERROR_TOO_MANY_OPEN_FILES = 4 Const ERROR_ACCESS_DENIED = 5 Const ERROR_INVALID_HANDLE = 6 Const ERROR_ARENA_TRASHED = 7 Const ERROR_NOT_ENOUGH_MEMORY = 8 Const ERROR_INVALID_BLOCK = 9 Const ERROR_BAD_ENVIRONMENT = 10 Const ERROR_BAD_FORMAT = 11 Const ERROR_INVALID_ACCESS = 12 Const ERROR_INVALID_DATA = 13 Const ERROR_OUTOFMEMORY = 14 Const ERROR_INVALID_DRIVE = 15 Const ERROR_CURRENT_DIRECTORY = 16 Const ERROR_NOT_SAME_DEVICE = 17 Const ERROR_NO_MORE_FILES = 18 Const ERROR_WRITE_PROTECT = 19 Const ERROR_BAD_UNIT = 20 Const ERROR_NOT_READY = 21 Const ERROR_BAD_COMMAND = 22 Const ERROR_CRC = 23 Const ERROR_BAD_LENGTH = 24 Const ERROR_SEEK = 25 Const ERROR_NOT_DOS_DISK = 26 Const ERROR_SECTOR_NOT_FOUND = 27 Const ERROR_OUT_OF_PAPER = 28 Const ERROR_WRITE_FAULT = 29 Const ERROR_READ_FAULT = 30 Const ERROR_GEN_FAILURE = 31 Const ERROR_SHARING_VIOLATION = 32 Const ERROR_LOCK_VIOLATION = 33 Const ERROR_WRONG_DISK = 34 Const ERROR_SHARING_BUFFER_EXCEEDED = 36 Const ERROR_HANDLE_EOF = 38 Const ERROR_HANDLE_DISK_FULL = 39 Const ERROR_NOT_SUPPORTED = 50 Const ERROR_REM_NOT_LIST = 51 Const ERROR_DUP_NAME = 52 Const ERROR_BAD_NETPATH = 53 Const ERROR_NETWORK_BUSY = 54 Const ERROR_DEV_NOT_EXIST = 55 Const ERROR_TOO_MANY_CMDS = 56 Const ERROR_ADAP_HDW_ERR = 57 Const ERROR_BAD_NET_RESP = 58 Const ERROR_UNEXP_NET_ERR = 59 Const ERROR_BAD_REM_ADAP = 60 Const ERROR_PRINTQ_FULL = 61 Const ERROR_NO_SPOOL_SPACE = 62 Const ERROR_PRINT_CANCELLED = 63 Const ERROR_NETNAME_DELETED = 64 Const ERROR_NETWORK_ACCESS_DENIED = 65 Const ERROR_BAD_DEV_TYPE = 66 Const ERROR_BAD_NET_NAME = 67 Const ERROR_TOO_MANY_NAMES = 68 Const ERROR_TOO_MANY_SESS = 69 Const ERROR_SHARING_PAUSED = 70 Const ERROR_REQ_NOT_ACCEP = 71 Const ERROR_REDIR_PAUSED = 72 Const ERROR_FILE_EXISTS = 80 Const ERROR_CANNOT_MAKE = 82 Const ERROR_FAIL_I24 = 83 Const ERROR_OUT_OF_STRUCTURES = 84 Const ERROR_ALREADY_ASSIGNED = 85 Const ERROR_INVALID_PASSWORD = 86 Const ERROR_INVALID_PARAMETER = 87 Const ERROR_NET_WRITE_FAULT = 88 Const ERROR_NO_PROC_SLOTS = 89 Const ERROR_TOO_MANY_SEMAPHORES = 100 Const ERROR_EXCL_SEM_ALREADY_OWNED = 101 Const ERROR_SEM_IS_SET = 102 Const ERROR_TOO_MANY_SEM_REQUESTS = 103 Const ERROR_INVALID_AT_INTERRUPT_TIME = 104 Const ERROR_SEM_OWNER_DIED = 105 Const ERROR_SEM_USER_LIMIT = 106 Const ERROR_DISK_CHANGE = 107 Const ERROR_DRIVE_LOCKED = 108 Const ERROR_BROKEN_PIPE = 109 Const ERROR_OPEN_FAILED = 110 Const ERROR_BUFFER_OVERFLOW = 111 Const ERROR_DISK_FULL = 112 Const ERROR_NO_MORE_SEARCH_HANDLES = 113 Const ERROR_INVALID_TARGET_HANDLE = 114 Const ERROR_INVALID_CATEGORY = 117 Const ERROR_INVALID_VERIFY_SWITCH = 118 Const ERROR_BAD_DRIVER_LEVEL = 119 Const ERROR_CALL_NOT_IMPLEMENTED = 120 Const ERROR_SEM_TIMEOUT = 121 Const ERROR_INSUFFICIENT_BUFFER = 122 Const ERROR_INVALID_NAME = 123 Const ERROR_INVALID_LEVEL = 124 Const ERROR_NO_VOLUME_LABEL = 125 Const ERROR_MOD_NOT_FOUND = 126 Const ERROR_PROC_NOT_FOUND = 127 Const ERROR_WAIT_NO_CHILDREN = 128 Const ERROR_CHILD_NOT_COMPLETE = 129 Const ERROR_DIRECT_ACCESS_HANDLE = 130 Const ERROR_NEGATIVE_SEEK = 131 Const ERROR_SEEK_ON_DEVICE = 132 Const ERROR_IS_JOIN_TARGET = 133 Const ERROR_IS_JOINED = 134 Const ERROR_IS_SUBSTED = 135 Const ERROR_NOT_JOINED = 136 Const ERROR_NOT_SUBSTED = 137 Const ERROR_JOIN_TO_JOIN = 138 Const ERROR_SUBST_TO_SUBST = 139 Const ERROR_JOIN_TO_SUBST = 140 Const ERROR_SUBST_TO_JOIN = 141 Const ERROR_BUSY_DRIVE = 142 Const ERROR_SAME_DRIVE = 143 Const ERROR_DIR_NOT_ROOT = 144 Const ERROR_DIR_NOT_EMPTY = 145 Const ERROR_IS_SUBST_PATH = 146 Const ERROR_IS_JOIN_PATH = 147 Const ERROR_PATH_BUSY = 148 Const ERROR_IS_SUBST_TARGET = 149 Const ERROR_SYSTEM_TRACE = 150 Const ERROR_INVALID_EVENT_COUNT = 151 Const ERROR_TOO_MANY_MUXWAITERS = 152 Const ERROR_INVALID_LIST_FORMAT = 153 Const ERROR_LABEL_TOO_LONG = 154 Const ERROR_TOO_MANY_TCBS = 155 Const ERROR_SIGNAL_REFUSED = 156 Const ERROR_DISCARDED = 157 Const ERROR_NOT_LOCKED = 158 Const ERROR_BAD_THREADID_ADDR = 159 Const ERROR_BAD_ARGUMENTS = 160 Const ERROR_BAD_PATHNAME = 161 Const ERROR_SIGNAL_PENDING = 162 Const ERROR_MAX_THRDS_REACHED = 164 Const ERROR_LOCK_FAILED = 167 Const ERROR_BUSY = 170 Const ERROR_CANCEL_VIOLATION = 173 Const ERROR_ATOMIC_LOCKS_NOT_SUPPORTED = 174 Const ERROR_INVALID_SEGMENT_NUMBER = 180 Const ERROR_INVALID_ORDINAL = 182 Const ERROR_ALREADY_EXISTS = 183 Const ERROR_INVALID_FLAG_NUMBER = 186 Const ERROR_SEM_NOT_FOUND = 187 Const ERROR_INVALID_STARTING_CODESEG = 188 Const ERROR_INVALID_STACKSEG = 189 Const ERROR_INVALID_MODULETYPE = 190 Const ERROR_INVALID_EXE_SIGNATURE = 191 Const ERROR_EXE_MARKED_INVALID = 192 Const ERROR_BAD_EXE_FORMAT = 193 Const ERROR_ITERATED_DATA_EXCEEDS_64k = 194 Const ERROR_INVALID_MINALLOCSIZE = 195 Const ERROR_DYNLINK_FROM_INVALID_RING = 196 Const ERROR_IOPL_NOT_ENABLED = 197 Const ERROR_INVALID_SEGDPL = 198 Const ERROR_AUTODATASEG_EXCEEDS_64k = 199 Const ERROR_RING2SEG_MUST_BE_MOVABLE = 200 Const ERROR_RELOC_CHAIN_XEEDS_SEGLIM = 201 Const ERROR_INFLOOP_IN_RELOC_CHAIN = 202 Const ERROR_ENVVAR_NOT_FOUND = 203 Const ERROR_NO_SIGNAL_SENT = 205 Const ERROR_FILENAME_EXCED_RANGE = 206 Const ERROR_RING2_STACK_IN_USE = 207 Const ERROR_META_EXPANSION_TOO_LONG = 208 Const ERROR_INVALID_SIGNAL_NUMBER = 209 Const ERROR_THREAD_1_INACTIVE = 210 Const ERROR_LOCKED = 212 Const ERROR_TOO_MANY_MODULES = 214 Const ERROR_NESTING_NOT_ALLOWED = 215 Const ERROR_BAD_PIPE = 230 Const ERROR_PIPE_BUSY = 231 Const ERROR_NO_DATA = 232 Const ERROR_PIPE_NOT_CONNECTED = 233 Const ERROR_MORE_DATA = 234 Const ERROR_VC_DISCONNECTED = 240 Const ERROR_INVALID_EA_NAME = 254 Const ERROR_EA_LIST_INCONSISTENT = 255 Const ERROR_NO_MORE_ITEMS = 259 Const ERROR_CANNOT_COPY = 266 Const ERROR_DIRECTORY = 267 Const ERROR_EAS_DIDNT_FIT = 275 Const ERROR_EA_FILE_CORRUPT = 276 Const ERROR_EA_TABLE_FULL = 277 Const ERROR_INVALID_EA_HANDLE = 278 Const ERROR_EAS_NOT_SUPPORTED = 282 Const ERROR_NOT_OWNER = 288 Const ERROR_TOO_MANY_POSTS = 298 Const ERROR_MR_MID_NOT_FOUND = 317 Const ERROR_INVALID_ADDRESS = 487 Const ERROR_ARITHMETIC_OVERFLOW = 534 Const ERROR_PIPE_CONNECTED = 535 Const ERROR_PIPE_LISTENING = 536 Const ERROR_EA_ACCESS_DENIED = 994 Const ERROR_OPERATION_ABORTED = 995 Const ERROR_IO_INCOMPLETE = 996 Const ERROR_IO_PENDING = 997 Const ERROR_NOACCESS = 998 Const ERROR_SWAPERROR = 999 Const ERROR_STACK_OVERFLOW = 1001 Const ERROR_INVALID_MESSAGE = 1002 Const ERROR_CAN_NOT_COMPLETE = 1003 Const ERROR_INVALID_FLAGS = 1004 Const ERROR_UNRECOGNIZED_VOLUME = 1005 Const ERROR_FILE_INVALID = 1006 Const ERROR_FULLSCREEN_MODE = 1007 Const ERROR_NO_TOKEN = 1008 Const ERROR_BADDB = 1009 Const ERROR_BADKEY = 1010 Const ERROR_CANTOPEN = 1011 Const ERROR_CANTREAD = 1012 Const ERROR_CANTWRITE = 1013 Const ERROR_REGISTRY_RECOVERED = 1014 Const ERROR_REGISTRY_CORRUPT = 1015 Const ERROR_REGISTRY_IO_FAILED = 1016 Const ERROR_NOT_REGISTRY_FILE = 1017 Const ERROR_KEY_DELETED = 1018 Const ERROR_NO_LOG_SPACE = 1019 Const ERROR_KEY_HAS_CHILDREN = 1020 Const ERROR_CHILD_MUST_BE_VOLATILE = 1021 Const ERROR_NOTIFY_ENUM_DIR = 1022 Const ERROR_DEPENDENT_SERVICES_RUNNING = 1051 Const ERROR_INVALID_SERVICE_CONTROL = 1052 Const ERROR_SERVICE_REQUEST_TIMEOUT = 1053 Const ERROR_SERVICE_NO_THREAD = 1054 Const ERROR_SERVICE_DATABASE_LOCKED = 1055 Const ERROR_SERVICE_ALREADY_RUNNING = 1056 Const ERROR_INVALID_SERVICE_ACCOUNT = 1057 Const ERROR_SERVICE_DISABLED = 1058 Const ERROR_CIRCULAR_DEPENDENCY = 1059 Const ERROR_SERVICE_DOES_NOT_EXIST = 1060 Const ERROR_SERVICE_CANNOT_ACCEPT_CTRL = 1061 Const ERROR_SERVICE_NOT_ACTIVE = 1062 Const ERROR_FAILED_SERVICE_CONTROLLER_CONNECT = 1063 Const ERROR_EXCEPTION_IN_SERVICE = 1064 Const ERROR_DATABASE_DOES_NOT_EXIST = 1065 Const ERROR_SERVICE_SPECIFIC_ERROR = 1066 Const ERROR_PROCESS_ABORTED = 1067 Const ERROR_SERVICE_DEPENDENCY_FAIL = 1068 Const ERROR_SERVICE_LOGON_FAILED = 1069 Const ERROR_SERVICE_START_HANG = 1070 Const ERROR_INVALID_SERVICE_LOCK = 1071 Const ERROR_SERVICE_MARKED_FOR_DELETE = 1072 Const ERROR_SERVICE_EXISTS = 1073 Const ERROR_ALREADY_RUNNING_LKG = 1074 Const ERROR_SERVICE_DEPENDENCY_DELETED = 1075 Const ERROR_BOOT_ALREADY_ACCEPTED = 1076 Const ERROR_SERVICE_NEVER_STARTED = 1077 Const ERROR_DUPLICATE_SERVICE_NAME = 1078 Const ERROR_END_OF_MEDIA = 1100 Const ERROR_FILEMARK_DETECTED = 1101 Const ERROR_BEGINNING_OF_MEDIA = 1102 Const ERROR_SETMARK_DETECTED = 1103 Const ERROR_NO_DATA_DETECTED = 1104 Const ERROR_PARTITION_FAILURE = 1105 Const ERROR_INVALID_BLOCK_LENGTH = 1106 Const ERROR_DEVICE_NOT_PARTITIONED = 1107 Const ERROR_UNABLE_TO_LOCK_MEDIA = 1108 Const ERROR_UNABLE_TO_UNLOAD_MEDIA = 1109 Const ERROR_MEDIA_CHANGED = 1110 Const ERROR_BUS_RESET = 1111 Const ERROR_NO_MEDIA_IN_DRIVE = 1112 Const ERROR_NO_UNICODE_TRANSLATION = 1113 Const ERROR_DLL_INIT_FAILED = 1114 Const ERROR_SHUTDOWN_IN_PROGRESS = 1115 Const ERROR_NO_SHUTDOWN_IN_PROGRESS = 1116 Const ERROR_IO_DEVICE = 1117 Const ERROR_SERIAL_NO_DEVICE = 1118 Const ERROR_IRQ_BUSY = 1119 Const ERROR_MORE_WRITES = 1120 Const ERROR_COUNTER_TIMEOUT = 1121 Const ERROR_FLOPPY_ID_MARK_NOT_FOUND = 1122 Const ERROR_FLOPPY_WRONG_CYLINDER = 1123 Const ERROR_FLOPPY_UNKNOWN_ERROR = 1124 Const ERROR_FLOPPY_BAD_REGISTERS = 1125 Const ERROR_DISK_RECALIBRATE_FAILED = 1126 Const ERROR_DISK_OPERATION_FAILED = 1127 Const ERROR_DISK_RESET_FAILED = 1128 Const ERROR_EOM_OVERFLOW = 1129 Const ERROR_NOT_ENOUGH_SERVER_MEMORY = 1130 Const ERROR_POSSIBLE_DEADLOCK = 1131 Const ERROR_MAPPED_ALIGNMENT = 1132

Used By

GetLastError, SetLastError, SetLastErrorEx

Go back to the Other Information listing.
Go back to the Reference section index.

Last Modified: March 19, 2000
This page is copyright © 2000 Paul Kuliniewicz. Copyright Information Revised October 29, 2000
Go back to the Windows API Guide home page.
E-mail: vbapi@vbapi.com Send Encrypted E-Mail
This page is at http://www.vbapi.com/ref/other/errorcodes.html