"Do I Know This Already?" Quiz The purpose of the "Do I Know This Already?" quiz is to help you decide whether you need to read the entire chapter. If you already intend to read the entire chapter, you do not necessarily need to answer these questions now. The 12-question quiz, derived from the major sections in the "Foundation Topics" portion of the chapter, helps you determine how to spend your limited study time. Table 7-1 outlines the major topics discussed in this chapter and the "Do I Know This Already?" quiz questions that correspond to those topics. Table 7-1. "Do I Know This Already?" Foundation Topics Section-to-Question MappingFoundation Topics Section | Questions Covered in This Section | Score |
|---|
VTP VTP Configuration | 18 | | VTP Pruning | 910 | | Troubleshooting VTP | 1112 | | Total Score | | |
Caution The goal of self-assessment is to gauge your mastery of the topics in this chapter. If you do not know the answer to a question or are only partially sure of the answer, you should mark this question wrong. Giving yourself credit for an answer you correctly guess skews your self- assessment results and might give you a false sense of security.
| 1. | Which of the following is not a Catalyst switch VTP mode? Server Client Designated Transparent
| | 2. | A switch in VTP transparent mode can do which one of the following? Create a new VLAN Only listen to VTP advertisements Send its own VTP advertisements Cannot make VLAN configuration changes
| | 3. | Which one of the following is a valid VTP advertisement? Triggered update VLAN database Subset Domain
| | 4. | Which one of the following is needed for VTP communication? A management VLAN A trunk link An access VLAN An IP address
| | 5. | Which one of the following VTP modes does not allow any manual VLAN configuration changes? Server Client Designated Transparent
| | 6. | Select all the parameters that decide whether to accept new VTP information: VTP priority VTP domain name Configuration revision number VTP server name
| | 7. | How many VTP management domains can a Catalyst switch participate in? 1 2 Unlimited 4096
| | 8. | Which IOS command configures a Catalyst switch for VTP client mode? set vtp mode client vtp client vtp mode client vtp client mode
| | 9. | What is the purpose of VTP pruning? Limit the number of VLANs in a domain Stop unnecessary VTP advertisements Limit the extent of broadcast traffic Limit the size of the virtual tree
| | 10. | Which VLAN number is never eligible for VTP pruning? 0 1 1000 1001
| | 11. | Which of the following might present a VTP problem? Two or more VTP servers in a domain Two servers with the same configuration revision number A server in two domains A new server with a higher configuration revision number
| | 12. | If a VTP server is configured for VTP version 2, what else must happen for successful VTP communication in a domain? A VTP version 2 password must be set. All other switches in the domain must be version 2 capable. All other switches must be configured for VTP version 2. The VTP configuration revision number must be reset.
|
The answers to the quiz are found in Appendix A, "Answers to the Chapter 'Do I Know This Already?' Quizzes and Q&A Sections." The suggested choices for your next step are as follows: 6 or less overall score Read the entire chapter, including the "Foundation Topics," "Foundation Summary," and "Q&A" sections. 79 overall score Begin with the "Foundation Summary" section and then follow with the "Q&A" section at the end of the chapter. 10 or more overall score If you want more review on these topics, skip to the "Foundation Summary" section and then go to the "Q&A" section at the end of the chapter. Otherwise, move on to Chapter 8, "Aggregating Switch Links."
|
