Table B-1 lists all the severity level 1 logging messages, along with their message numbers and text. All the messages supported by PIX OS releases 6.3 and 7.0, as well as FWSM 2.3, are shown.
Table B-1. Severity 1 (Alerts) Logging Messages
Level and Message Number | Message Text |
|---|
%PIX-1-101001 | (Primary) Failover cable OK. |
%PIX-1-101002 | (Primary) Bad failover cable. |
%PIX-1-101003 | (Primary) Failover cable not connected (this unit). |
%PIX-1-101004 | (Primary) Failover cable not connected (other unit). |
%PIX-1-101005 | (Primary) Error reading failover cable status. |
%PIX-1-102001 | (Primary) Power failure/system reload other side. |
%PIX-1-103001 | (Primary) No response from other firewall (reason code = code). |
%PIX-1-103002 | (Primary) Other firewall network interface interface_number OK. |
%PIX-1-103003 | (Primary) Other firewall network interface interface_number failed. |
%PIX-1-103004 | (Primary) Other firewall reports this firewall failed. |
%PIX-1-103005 | (Primary) Other firewall reporting failure. |
%PIX-1-103011 | Unknown message text. (7.0) |
%PIX-1-104001 | (Primary) Switching to ACTIVE (cause: string). |
%PIX-1-104002 | (Primary) Switching to STNDBY (cause: string). |
%PIX-1-104003 | (Primary) Switching to FAILED. |
%PIX-1-104004 | (Primary) Switching to OK. |
%PIX-1-105001 | (Primary) Disabling failover. |
%PIX-1-105002 | (Primary) Enabling failover. |
%PIX-1-105003 | (Primary) Monitoring on interface interface_name waiting. |
%PIX-1-105004 | (Primary) Monitoring on interface interface_name normal. |
%PIX-1-105005 | (Primary) Lost failover communications with mate on interface interface_name. |
%PIX-1-105006 | (Primary) Link status 'Up' on interface interface_name. |
%PIX-1-105007 | (Primary) Link status 'Down' on interface interface_name. |
%PIX-1-105008 | (Primary) Testing interface interface_name. |
%PIX-1-105009 | (Primary) Testing on interface interface_name {Passed | Failed}. |
%PIX-1-105011 | (Primary) Failover cable communication failure. |
%PIX-1-105020 | (Primary) Incomplete/slow config replication. |
%PIX-1-105031 | Failover LAN interface is up. |
%PIX-1-105032 | LAN failover interface is down. |
%PIX-1-105033 | Unknown message text. (7.0) |
%PIX-1-105034 | Receive a LAN_FAILOVER_UP message from peer. |
%PIX-1-105035 | Receive a LAN failover interface down message from a peer. |
%PIX-1-105036 | PIX dropped a LAN failover command message. |
%PIX-1-105037 | The primary and standby units are switching back and forth as the active unit. |
%PIX-1-105038 | (Primary) Interface count mismatch. (7.0) |
%PIX-1-105039 | (Primary) Unable to verify the interface count with mate. Failover may be disabled in mate. (7.0) |
%PIX-1-105040 | (Primary) Mate failover version is not compatible. (7.0) |
%PIX-1-105041 | Unknown message text. (7.0) |
%PIX-1-105042 | (Primary) Failover interface OK. (7.0) |
%PIX-1-105043 | (Primary) Failover interface failed. (7.0) |
%PIX-1-105044 | (Primary) Mate operational mode mode is not compatible with my mode mode. (7.0) |
%PIX-1-105045 | Primary) Mate license (number contexts) is not compatible with my license (number contexts). (7.0) |
%PIX-1-105046 | (Primary | Secondary) Mate has a different chassis. (7.0) |
%PIX-1-105047 | Mate has an io_card_name1 card in slot slot_number that is different from my io_card_name2. (7.0) |
%PIX-1-106004 | Unknown message text. (7.0) |
%PIX-1-106005 | Unknown message text. (7.0) |
%PIX-1-106008 | Unknown message text. (7.0) |
%PIX-1-106021 | Deny protocol reverse path check from source_address to dest_address on interface interface_name. |
%PIX-1-106022 | Deny protocol connection spoof from source_address to dest_address on interface interface_name. |
%PIX-1-106101 | The number of ACL log deny-flows has reached limit (number). |
%PIX-1-107001 | RIP auth failed from IP_address. |
%PIX-1-107002 | RIP pkt failed from IP_address. |
%PIX-1-108001 | Unknown message text. (7.0) |
%PIX-1-109004 | Unknown message text. (7.0) |
%PIX-1-111002 | Begin configuration: IP_address writing to device. (7.0) |
%PIX-1-111111 | error_message. (7.0: System or infrastructure error has occurred) |
%PIX-1-415001 | :internal_sig_id HTTP Tunnel detectedaction tunnel_type from src_ip to dest_ip. (7.0) |
%PIX-1-415002 | :internal_sig_id HTTP Instant Messenger detectedaction instant_messenger_type from src_ip to dest_ip. (7.0) |
%PIX-1-415003 | :internal_sig_id HTTP Peer-to-Peer detectedaction instant_messenger_type from src_ip to dest_ip. (7.0) |
%PIX-1-415004 | :internal_sig_id Content type not foundaction Content Verification Failed from src_ip to dest_ip. (7.0) |
%PIX-1-415006 | :internal_sig_id Content size size out of rangeaction mime_type from src_ip to dest_ip. (7.0) |
%PIX-1-415007 | :internal_sig_id HTTP Extension method illegalaction 'method_name' from src_ip to dest_ip. (7.0) |
%PIX-1-415008 | :internal_sig_id HTTP RFC method illegalaction 'method_name' from src_ip to dest_ip. (7.0) |
%PIX-1-415009 | :internal_sig_id HTTP Header length exceeded. Received length byte Headeraction header length exceeded from src_ip to dest_ip. (7.0) |
%PIX-1-415010 | :internal_sig_id HTTP protocol violation detectedaction HTTP Protocol not detected from src_ip to dest_ip. (7.0) |
%PIX-1-415011 | :internal_sig_id HTTP URL Length exceeded. Received size byte URLaction URI length exceeded from src_ip to dest_ip. (7.0) |
%PIX-1-415012 | :internal_sig_id HTTP Deobfuscation signature detectedaction HTTP deobfuscation detected IDS evasion technique from src_ip to src_ip. (7.0) |
%PIX-1-415013 | :internal_sig_id HTTP Transfer encoding violation detectedaction Xfer_encode Transfer encoding not allowed from src_ip to dest_ip. (7.0) |
%PIX-1-415014 | :internal_sig_id Maximum of 10 unanswered HTTP requests exceeded from src_ip to dest_ip. (7.0) |
%PIX-1-709003 | (Primary) Beginning configuration replicationReceiving from mate. |
%PIX-1-709004 | (Primary) End Configuration Replication (ACT). |
%PIX-1-709005 | (Primary) Beginning configuration replicationReceiving from mate. |
%PIX-1-709006 | (Primary) End Configuration Replication (STB). |
%PIX-1-713900 | Descriptive_event_string. (7.0: A message with several possible text strings describing a serious event or failure) |
%PIX-1-715039 | Unexpected cleanup of tunnel table entry during SA delete. (7.0) |
