CD-ROM Module Parameters
|
Even though parameters are specified after loading the driver disk and specifying the device, one of the more commonly used parameters (hdX=cdrom) can be entered at the boot prompt (boot:) during installation. This exception to the rule is allowed since it deals with support for IDE/ATAPI CD-ROMs, which is already part of the kernel.
| Note | Not all of the CD-ROM drives that are listed in Table C-1 are supported. Please check the Hardware Compatibility List on Red Hat’s website at http://hardware.redhat.com to make sure your CD-ROM drive is supported. |
In the following tables, most modules listed without any parameters can either be auto-probed to find the hardware or they require you to manually change settings in the module source code and recompile.
| Hardware | Module | Parameters |
|---|---|---|
| ATAPI/IDE CD-ROM Drives | hdX=cdrom | |
| Aztech CD268-01A, Orchid CD-3110, Okano/Wearnes CDD110, Conrad TXC, CyCDROM CR520, CyCDROM CR540 (non-IDE) | Aztcd.o | aztcd=io_port |
| Sony CDU-31A CD-ROM | Cdu31a.o | cdu31a=io_port,IRQ OR cdu31a_port=base_addr cdu31a_irq=irq |
| Philips/LMS CDROM drive 206 with cm260 host adapter card | cm206.o | cm206=io_port,IRQ |
| Goldstar R420 CD-ROM | gscd.o | gscd=io_port |
| ISP16, MAD16, or Mozart sound card CD-ROM interface (OPTi 82C928 and OPTi 82C929) with Sanyo/Panasonic, Sony, or Mitsumi drives | isp16.o | isp16=io_port,IRQ,dma, drive_type OR isp16_cdrom_base=io_port isp16_cdrom_irq=IRQ isp16_cdrom_dma=dma isp16_cdrom_type=drive_type |
| Mitsumi CD-ROM, Standard | mcd.o | mcd=io_port,IRQ |
| Mitsumi CD-ROM, Experimental | mcdx.o | mcdx=io_port_1,IRQ_1, io_port_n,IRQ_n |
| Optics storage 8000 AT “Dolphin” drive, Lasermate CR328A | optcd.o | |
| Parallel-Port IDE CD-ROM | pcd.o | |
| SB Pro 16 Compatible | sbpcd.o | sbpcd=io_port |
| Sanyo CDR-H94A | sjcd.o | sjcd=io_port OR sjcd_base=io_port |
| Sony CDU-535 & 531 (some Procomm drives) | sonycd535.o | sonycd535=io_port |
Table C-2 shows some examples of these modules in use.
| Configuration | Example |
|---|---|
| ATAPI CD-ROM, jumpered as master on the second IDE channel | hdc=cdrom |
| non-IDE Mitsumi CD-ROM on port 340, IRQ 11 | mcd=0x340,11 |
| Three non-IDE Mitsumi CD-ROM drives using the experimental driver, io ports 300, 304, and 320 with IRQs 5, 10 and 11 | mcdx=0x300,5,0x304,10,0x320,11 |
| Sony CDU 31 or 33 at port 340, no IRQ | cdu31=0x340,0 OR cdu31_port=0x340 cdu31a_irq=0 |
| Aztech CD-ROM at port 220 | aztcd=0x220 |
| Panasonic-type CD-ROM on a SoundBlaster interface at port 230 | sbpcd=0x230,1 |
| Phillips/LMS cm206 and cm260 at IO 340 and IRQ 11 | cm206=0x340,11 |
| Goldstar R420 at IO 300 | gscd=0x300 |
| Mitsumi drive on a MAD16 soundcard at IO Addr 330 and IRQ1, probing DMA | isp16=0x330,11,0,Mitsumi |
| Sony CDU 531 at IO address 320 | sonycd535=0x320 |
| Note | Most newer Sound Blaster cards come with IDE interfaces. For these cards, you do not need to use sbpcd parameters; use only hdX parameters.
|
Table C-4 shows some examples of these modules in use.
| Configuration | Example |
|---|---|
| Adaptec AHA1522 at port 330, IRQ 11, SCSI ID 7 | aha152x=0x330,11,7 |
| Adaptec AHA1542 at port 330 | bases=0x330 |
| Future Domain TMC-800 at CA000, IRQ 10 | controller_type=2 base_address=0xca000 irq=10 |
| Hardware | Module | Parameters |
|---|---|---|
| 3Com 3c501 | 3c501.o | 3c501=io_port,IRQ |
| 3Com 3c503 and 3c503/16 | 3c503.o | 3c503=io_port,IRQ OR 3c503 io=io_port_1,io_port_n irq=IRQ_1,IRQ_n |
| 3Com EtherLink Plus (3c505) | 3c505.o | 3c505=io_port,IRQ OR 3c505 io=io_port_1,io_port_n irq=IRQ_1,IRQ_2 |
| 3Com EtherLink 16 | 3c507.o | 3c507=io_port,IRQ OR 3c507 io=io_port irq=IRQ |
| 3Com EtherLink III | 3c509.o | 3c509=io_port,IRQ |
| 3Com ISA EtherLink XL “Corkscrew” | 3c515.o | |
| 3Com EtherLink PCI III/XL Vortex (3c590, 3c592, 3c595, 3c597) Boomerang (3c900, 3c905, 3c595) | 3c59x.o | full_duplex= |
| RTL8139, SMC EZ Card Fast Ethernet | 8139too.o | |
| RealTek cards using RTL8129 or RTL8139 Fast Ethernet chipsets | 8139too.o | |
| Apricot 82596 | 82596.o | |
| Ansel Communications Model 3200 | ac3200.o | ac3200=io_port,IRQ OR ac3200 io=io_port_1,io_port_n irq=IRQ_1,IRQ_n |
| Alteon AceNIC Gigabit | acenic.o | |
| Aironet Arlan 655 | arlan.o | |
| Allied Telesis AT1700 | at1700.o | at1700=io_port,IRQ OR at1700 io=io_port irq=IRQ |
| Broadcom BCM5700 10/100/1000 ethernet adapter | bcm5700.o | |
| Crystal SemiconductorCS89[02]0 | cs89x0.o | |
| EtherWORKS DE425 TP/COAX EISA, DE434 TP PCI, DE435/450 TP/COAX/AUI PCI DE500 10/100 PCI Kingston, LinkSys, SMC8432, SMC9332, Znyx31[45], and Znyx346 10/100 cards with DC21040 (no SROM), DC21041[A], DC21140[A], DC21142, DC21143 chipsets | de4x5.o de4x5=io_port OR de4x5 io=io_port de4x5 args='ethX[fdx] autosense=MEDIA_STRING' | |
| D-Link DE-600 Ethernet Pocket Adapter | de600.o | |
| D-Link DE-620 Ethernet Pocket Adapter | de620.o | |
| DIGITAL DEPCA & EtherWORKS DEPCA, DE100, DE101, DE200 Turbo, DE201Turbo DE202 Turbo TP/BNC, DE210, DE422 EISA | depca.o depca=io_port,IRQ OR depca io=io_port irq=IRQ | |
| Digi Intl. RightSwitch SE-X EISA and PCI | dgrs.o | |
| Davicom DM9102(A)/DM9132/DM9801 Fast Ethernet | dmfe.o | |
| Intel Ether Express/100 driver | e100.o | e100_speed_duplex=X If X = |
| Intel EtherExpress/1000 Gigabit | e1000.o | |
| Cabletron E2100 | e2100.o | e2100=io_port,IRQ,mem OR e2100 io=io_port irq=IRQ mem=mem |
| Intel EtherExpress Pro10 | eepro.o | eepro=io_port,IRQ OR eepro io=io_port irq=IRQ |
| Intel i82557/i82558 PCI EtherExpressPro driver | eepro100.o | |
| Intel EtherExpress 16 (i82586) | eexpress.o | eexpress=io_port,IRQ OR eexpress io=io_port irq=IRQ options= |
| SMC EtherPower II 9432 PCI (83c170/175 EPIC series) | epic100.o | |
| Racal-Interlan ES3210 EISA | es3210.o | |
| ICL EtherTeam 16i/32 EISA | eth16i.o | eth16i=io_port,IRQ OR eth16i ioaddr=io_port IRQ=IRQ |
| EtherWORKS 3 (DE203, DE204 and DE205) | ewrk3.o | ewrk=io_port,IRQ OR ewrk io=io_port irq=IRQ |
| A Packet Engines GNIC-II Gigabit | hamachi.o | |
| HP PCLAN/plus | hp-plus.o | hp-plus=io_port,IRQ OR hp-plus io=io_port irq=IRQ |
| HP LAN Ethernet | hp.o | hp=io_port,IRQ OR hp io=io_port irq=IRQ |
| 100VG-AnyLan Network Adapters HP J2585B, J2585A, J2970, J2973, J2573 Compex ReadyLink ENET100-VG4, FreedomLine 100/VG | hp100.o | hp100=io_port,name OR hp100 hp100_port=io_port hp100_name=name |
| IBM Token Ring 16/4, Shared-Memory IBM Token Ring 16/4 | ibmtr.o | ibmtr=io_port OR io=io_port |
| AT1500, HP J2405A, NE2100/clone | lance.o | |
| Mylex LNE390 EISA | lne390.o | |
| NatSemi DP83815 Fast Ethernet | natsemi.o | |
| NE1000 / NE2000 (non-pci) | ne.o | ne=io_port,IRQ OR ne io=io_port irq=IRQ |
| PCI NE2000 cards RealTEk RTL-8029, Winbond 89C940, Compex RL2000, PCI NE2000 clones, NetVin, NV5000SC, Via 82C926, SureCom NE34 | ne2k-pci.o | |
| Novell NE3210 EISA | ne3210.o | |
| MiCom-Interlan NI5010 | ni5010.o | |
| NI5210 card (i82586 Ethernet chip) | ni52.o | ni52=io_port,IRQ OR ni52 io=io_port irq=IRQ |
| NI6510 Ethernet | ni65.o | |
| IBM Olympic-based PCI token ring | olympic.o | |
| AMD PCnet32 and AMD PCnetPCI | pcnet32.o | |
| SIS 900/701G PCI Fast Ethernet | sis900.o | |
| SysKonnect SK-98XX Gigabit | sk98lin.o | |
| SMC Ultra and SMC EtherEZ ISA ethercard (8K, 83c790) | smc-ultra.o | smc-ultra=io_port,IRQ OR smc-ultra io=io_port irq=IRQ |
| SMC Ultra32 EISA Ethernet card (32K) | smc-ultra32.o | |
| Sun BigMac Ethernet | sunbmac.o | |
| Sundance ST201 Alta | sundance.o | |
| Sun Happy Meal Ethernet | sunhme.o | |
| Sun Quad Ethernet | sunqe.o | |
| ThunderLAN | tlan.o | |
| Digital 21x4x Tulip PCI Ethernet cards SMC EtherPower 10 PCI(8432T/8432BT) SMC EtherPower 10/100 PCI(9332DST) DEC EtherWorks 100/10 PCI(DE500-XA) DEC EtherWorks 10 PCI(DE450) DEC QSILVER's, Znyx 312 etherarray Allied Telesis LA100PCI-T Danpex EN-9400, Cogent EM110 | tulip.o | io=io_port |
| VIA Rhine PCI Fast Ethernet cards with either the VIA VT86c100A Rhine-II PCI or 3043 Rhine-I D-Link DFE-930-TX PCI 10/100 | via-rhine.o | |
| AT&T GIS (nee NCR) WaveLan ISA Card | wavelan.o | wavelan=[IRQ,0],io_port, NWID |
| WD8003 and WD8013-compatible Ethernet cards | wd.o | wd=io_port,IRQ,mem, mem_end OR wd io=io_port irq=IRQ mem=mem mem_end=end |
| Compex RL100ATX-PCI | winbond.o | |
| Packet Engines Yellowfin | yellowfin.o |
Table C-6 shows sample configurations for NE2000 and Wavelan Ethernet cards.
| Configuration | Example |
|---|---|
| NE2000 ISA card at IO address 300 and IRQ 11 | ne=0x300,11 ether=0x300,11,eth0 |
| Wavelan card at IO 390, autoprobe for IRQ, and use the NWID to 0x4321 | wavelan=0,0x390,0x4321 ether=0,0x390,0x4321,eth0 |
Using Multiple Ethernet Cards
You can use multiple Ethernet cards in one machine. If each card uses a different driver (for example, a 3c509 and a DE425), you simply need to add alias (and possibly options) lines for each card to /etc/modules.conf. See Chapter 13 for more information.
If any two Ethernet cards use the same driver (such as two 3c509 cards or a 3c595 and a 3c905), you will need to either give the two card addresses on the driver’s options line (for ISA cards) or simply add one alias line for each card (for PCI cards).
For additional information about using more than one Ethernet card, see the Linux Ethernet-HOWTO at http://www.redhat.com/mirrors/LDP/HOWTO/Ethernet-HOWTO.html.
|
EAN: 2147483647
Pages: 278