|
OES Linux ships with iMonitor v2.3. The goal of iMonitor is to provide a web-based alternative, and eventual replacement, for many of the traditional eDirectory management and troubleshooting tools such as DSBrowse, DSTrace, DSDiag, and much of DSRepair. iMonitor is capable of gathering information not only from OES servers, but from most any version of eDirectory, including NDS version 4.11 or higher, and NDS or eDirectory running on any supported platform (NetWare, Windows NT/2000, Solaris, Linux, and Tru64). Although iMonitor does provide tree-wide management, it is designed to get "down in the weeds" just like the console-based tools that you may have used in the past. It keeps track of the activities of the DSAgent running on each eDirectory server, so you can get an accurate picture of what is happening at any given time. The following list identifies some of the major features offered by iMonitor in OES:
As you can see, much of what was previously accomplished by console-based tools is now available via the web-based interface of iMonitor. Installing iMonitoriMonitor is installed automatically during the installation of OES Linux. Because it shares resources with NRM, the httpstkd daemon must be loaded on the server in order to access iMonitor. The novell-httpstkd daemon is started in runlevels 2 through 5 to accomplish this. After the installation, use a web browser from a client computer in your network or from the server itself to access iMonitor. To access iMonitor from an Internet connection outside your firewall, you will need to make sure that TCP port 8030 is opened through the firewall to the IP address of your web server. Port 8030 is the default port through which you will access the Web Manager interface. If you like, you can change this port as long as it doesn't conflict with any other service on the OES NetWare server. To use iMonitor, you must use a web browser such as Konqueror or Mozilla on a Linux workstation, or Internet Explorer or Netscape Communicator on a Windows workstation. Make sure that Java or JavaScript is enabled on your web browser. Access iMonitor directly by opening your web browser and entering your web server's domain name or IP address, the iMonitor port number (8009), and the iMonitor path (/nds). For example: https://www.quills.com:8030/nds or https://192.168.1.100:8030/nds You might be prompted to accept a certificate. At the Authentication dialog box, enter the full username, with a leading dot, and password of an eDirectory user with administrative rights to this server, and then select OK to display the screen shown in Figure 5.6. Figure 5.6. The iMonitor home page showing a summary of DSAgent information.As with NRM, your iMonitor session remains open until all browser windows at your workstation are closed. iMonitor BasicsiMonitor adheres to a page layout similar to that of NRM and iManager. There are four possible frames to an iMonitor page:
The amount and type of information that you see in iMonitor is dependent on your current eDirectory identity and the version of the DSAgent with which you are currently working. As new versions of eDirectory are released, they will be updated to provide more information to iMonitor. Therefore, older versions of eDirectory or NDS, although still accessible via iMonitor, will not provide the same level of detail offered by current versions of eDirectory provided with OES. MODES OF OPERATIONiMonitor can function in one of two possible modes. You don't need to do anything to select between the two modes; iMonitor handles it automatically. However, it is important to understand them in order to properly interpret iMonitor data and navigate the eDirectory tree.
iMonitor chooses the mode based on the URL request submitted from your browser. If the URL contains a server query, iMonitor will use Proxy mode. If no server query is present, iMonitor will run the query against the local DSAgent using Direct mode. CONFIGURING IMONITORThe default configuration of iMonitor is suitable for most environments. However, iMonitor offers a configuration file, /etc/ndsimon.conf, that allows you to customize iMonitor. It allows you to change both the general execution of iMonitor, as well as customize specific iMonitor features. For more information on iMonitor, see the OES online documentation. |
|