Flylib.com
P
Previous page
Table of content
Next page
[SYMBOL] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [Z]
Scalable Reliable Multicast (SRM)
Scaling factor
Screened subnet
SDP (Service Discovery Protocol) protocol
Secure Copy (SCP)
Security option
Segments
Semaphores 2nd
send()
Sender and destination addresses, IP packet header
Sender implosion problem
sendmsg()
sendto()
Sequence numbers
Serial-Line Internet Protocol (SLIP)
character stuffing
CSLIP operating mode
defined
functionality
modes supported by
packet detection
SLIP implementation in the Linux kernel
activating and deactivating a network device
functions and data structures
general procedure
initializing the driver and establishing a connection
receiving IP packets
tearing down a connection and deinitializing the driver
transmitting IP packets
SLIP6 operating mode
Service
Service access points (SAPs)
Service Data Unit (SDU)
Service interface
Services and protocols
Session layer, ISO/OSI reference model
setaging bridge time command
setbridgeprio bridge prio command
setfd bridge time command
setgcint bridge time command
sethello bridge time command
setmaxage bridge time command
setpathcost bridge port cost command
setportprio bridge port prio command
show command
showbr bridge command
showmacs bridge command
Signaled virtual channels
svc_bind()
Signaled Virtual Connection (SVC)
Simple Mail Transfer Protocol (SMTP), defined
sioc_sg_req structure
sioc_vif_req structure
SIOCGIFMAP (Socket I/O Control Get InterFace MAP) command
SIOCSIFMAP (Socket I/O Control Set InterFace MAP) command
skb_append()
skb_clone()
skb_cloned()
skb_copy()
skb_copy_expand()
skb_cow()
skb_dequeue()
skb_dequeue_tail()
skb_get()
skb_head_from_pool()
skb_head_to_pool()
skb_header_init()
skb_headroom()
skb_insert()
skb_over_panic()
skb_peek()
skb_pull()
skb_push()
skb_put()
skb_queue_empty()
skb_queue_head()
skb_queue_head_init()
skb_queue_len()
skb_queue_purge()
skb_queue_tail()
skb_realloc_headroom()
skb_reserve()
skb_shared()
skb_tailroom()
skb_trim()
skb_under_panic()
skb_unlink()
skb_unshare()
sl_bump()
sl_close()
sl_encaps()
sl_init()
sl_open()
sl_xmit()
Slabs
Sliding-window protocol mechanism
SLIP [See Serial-Line Internet Protocol (SLIP)]
slip structure
slip_close()
slip_esc()
slip_init_ctrl_dev()
slip_open()
slip_receive_buf()
slip_receive_room()
slip_unesc()
slip_write_wakeup()
SLIP6 operating mode
Slow interrupts
Slow Path 2nd
Slow-start threshold
Small-packetavoidance algorithm [See Nagle algorithm]
SMP (Symmetric MultiProcessing)
sock_alloc()
sock_create()
sock_def_readable()
sock_map_fd()
Socket addresses
Socket API, functions of
Socket buffers
managing in queues
operations on
Socket operations
Socket-buffer queues
operations on
Sockets 2nd
BSD sockets
sock_alloc()
sock_create()
sock_map_fd()
sys_socket()
sys_socketcall()
communication over, example for
network programming with
PF_INET sockets
inet_create()
PF_NETLINK sockets
netlink_unicast()
PF_PACKET sockets
packet_rcv()
packet_sendmsg()
sock_def_readable()
protocol-specific sockets
Soft IRQs
Software interrupts 2nd
Source code
Source NAT
Source Quench messages, sending
Source Route property
Source-routing bridges [See Transparent bridges]
Spanning-tree algorithm:
root bridge, selecting
root port, determining for each bridge
running
selecting the designated bridge for a LAN
Spanning-tree protocol
avoiding temporary loops
behavior when a component fails
defined
functions used to display a topology change:
br_received_tcn_bpdu()
br_topology_change_acknowledged()
br_topology_change_detection()
implementing
br_become_designated_port()
br_designated_port_selection()
br_port_state_selection()
br_received_config_bpdu()
br_record_config_information()
br_record_config_timeout_values()
br_root_selection()
br_supersedes_port_info()
br_transmit_config()
functions used to display a topology change
initialization
processing BPDUs
timer handling
prerequisities/terminology
root of the tree topology, determining
running
spanning-tree algorithm, steps of
topology changes
Spinlocks 2nd
read-write
Splitter
Stateful filter
States (phases) of the PPP daemon
stp bridge [en|dis] command
Stream Identifier option
Strict Source Routing option
struct net_device_stats
struct tty_ldisc
sys_socket()
sys_socketcall()
sysctl() function
Previous page
Table of content
Next page
Linux Network Architecture
ISBN: 131777203
EAN: N/A
Year: 2004
Pages: 187
BUY ON AMAZON
Network Security Architectures
Applied Knowledge Questions
Supporting-Technology Design Considerations
Security System Concepts
Network Design Considerations
Identity Considerations
Pocket Guide to the National Electrical Code(R), 2005 Edition (8th Edition)
Article 411: Lighting Systems Operating at 30 Volts or Less
Article 424: Fixed Electric Space Heating Equipment
Example No. D4(b) Optional Calculation for Multifamily Dwelling
Example No. D5(b) Optional Calculation for Multifamily Dwelling Served at 208Y/120 Volts, Three Phase
Example No. D12 Park Trailer (See 552.47)
Junos Cookbook (Cookbooks (OReilly))
Restricting Inbound SSH and Telnet Access
Router Interfaces
Changing a Routes Routing Information
Authenticating BGP Peers
Protecting an LSPs Path
Quantitative Methods in Project Management
Project Value: The Source of all Quantitative Measures
Introduction to Probability and Statistics for Projects
Risk-Adjusted Financial Management
Quantitative Time Management
Special Topics in Quantitative Management
.NET-A Complete Development Cycle
Evaluating .NET for Windows Client Applications
Visual Studio.NET: Platform of Choice
Conclusion
Online Store Requirements
No Longer under Construction
GDI+ Programming with C#
Understanding GDI+
GDI+ Namespaces and Classes in .NET
A Simple Text Editor
Cautions for Using GDI in Managed Code
Section A.2. Understanding the try...catch Block
flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net
Privacy policy
This website uses cookies. Click
here
to find out more.
Accept cookies