The OpenBoot PROM monitor is one of the outstanding features of the SPARC architecture. It allows a wide range of system parameters to be configured using a high-level programming language that is independent of the installed operating system. A wide range of diagnostic and testing applications are included with OpenBoot.
1. | How can the default boot device be set to CD-ROM from the OpenBoot PROM monitor?
|
|
2. | How can the default boot device be set to disk from the OpenBoot PROM monitor?
|
|
3. | How can the default boot device be set to net from the OpenBoot PROM monitor?
|
|
4. | How can the default boot device be set to tape from the OpenBoot PROM monitor?
|
|
5. | How can the default boot device be set to floppy from the OpenBoot PROM monitor?
|
|
6. | How can a reconfiguration boot be performed from the OpenBoot PROM monitor?
|
|
7. | How can a manual boot be performed from the OpenBoot PROM monitor?
|
|
8. | How can the system clock be tested from the OpenBoot PROM monitor?
|
|
9. | How can the network connection be tested from the OpenBoot PROM monitor?
|
|
10. | How can a reconfiguration boot be performed from a shell?
|
|
Answers
1. | A. The setenv command must be used in conjunction with the boot-device variable for the token cdrom. |
2. | A. The setenv command must be used in conjunction with the boot-device variable for the token disk. |
3. | A. The setenv command must be used in conjunction with the boot-device variable for the token net. |
4. | A. The setenv command must be used in conjunction with the boot-device variable for the token tape. |
5. | A. The setenv command must be used in conjunction with the boot-device variable for the token floppy. |
6. | D. The boot command must have the -r (reconfigure) option passed. |
7. | C. The boot command must have the -a (manual) option passed. |
8. | B. The watch-clock command can be used to "watch" the system clock. |
9. | B. The watch-net command can be used to "watch" the packets on the primary network interface. |
10. | A. You must create the /reconfigure file before giving the reboot command. |