1 | What two components compose a SCSI logical unit? |
2 | Which SAM addressing construct facilitates communication with an object? |
3 | What is a standards body that defines an address format commonly called? |
4 | Which organization assigns organizationally unique identifiers (OUIs)? |
5 | If fragmentation occurs, where does it occur? |
6 | Is it possible for a network protocol to guarantee that frames or packets will never be dropped? |
7 | Why do most packet-switching technologies support bandwidth reservation schemes? |
8 | Does the SAM explicitly require in-order delivery of frames or packets composing a SCSI request or response? |
9 | Which term describes tagging of frames transmitted on an ISL to indicate the VLAN or VSAN membership of each frame? |
10 | The X2 and XPAK MSAs derive their electrical specifications from which MSA? |
11 | What is the maximum operating range of the SPI? |
12 | Does the SPI support in-order delivery? |
13 | Which fiber-optic connectors are supported by GE? |
14 | What is the maximum operating range of 10GBASE-EW using a normal SMF link? |
15 | What is the BER of 1000BASE-T? |
16 | What are the /C1/ and /C2/ ordered sets used for in 1000BASE-SX? |
17 | An Ethernet MAC address is equivalent to which SAM addressing construct? |
18 | What is the purpose of GVRP? |
19 | Which Ethernet frame format is most common today? |
| |
20 | How many types of service does Ethernet support? |
21 | Can flow-based load balancing be implemented across an Ethernet port channel? |
22 | Do copper-based and fiber-based Ethernet implementations follow the same link initialization procedures? |
23 | What is the most common fiber-optic connector used by 2-Gbps FC devices? |
24 | What is the maximum operating range of 2-Gbps FC on 62.5 micron MMF? |
25 | How many 8B/10B control characters does 4-Gbps FC use? |
26 | What information does the NAA field of an FC WWN provide? |
27 | What do FC attached SCSI initiators do following receipt of an RSCN frame? |
28 | Does the header of a FC frame provide functionality at OSI Layers other the data-link layer? |
29 | Which FC CoS is used by default in most FC-SANs? |
30 | Does FC currently support automation of link aggregation? |
31 | What determines the sequence of events during extended FC link initialization? |