Hack 59 Aggregate Logs from Remote Sites


figs/expert.gif figs/hack59.gif

Integrate collocated and other remote systems or networks into your central syslog infrastructure.

Monitoring the logs of a remote site or just a collocated server can often be overlooked when faced with the task of monitoring activity on your local network. You could use the traditional syslog facilities to send logging information from the remote network or systems, but since the syslog daemon uses UDP for sending to remote systems, this is not the ideal solution. UDP provides no reliability in its communications, and so you risk losing logging information. In addition, the traditional syslog daemon has no means to encrypt the traffic that it sends, so your logs might being viewable by anyone with access to the intermediary networks between you and your remote hosts or networks.

To get around these issues, you'll have to look beyond the syslog daemon that comes with your operating system and find a replacement. One such replacement syslog daemon is syslog-ng (http://www.balabit.com/products/syslog_ng/). syslog-ng is not only a fully functional replacement for the traditional syslog daemon, but also adds flexible message filtering capabilities, as well as support for logging to remote systems over TCP (in addition to support for the traditional UDP protocol). With the addition of TCP support, you can also employ stunnel or ssh to securely send the logs across untrusted networks.

To build syslog-ng, you will need the libol library package (http://www.balabit.com/downloads/syslog-ng/libol/) in addition to the syslog-ng package. After downloading these packages, unpack them and then build libol:

$ tar xfz libol-0.3.9.tar.gz $ cd libol-0.3.9 $ ./configure && make

When you build syslog-ng you can have it statically link to libol, so there is no need to fully install the library.

And now to build syslog-ng:

$ tar xfz syslog-ng-1.5.26.tar.gz $ cd syslog-ng-1.5.26 $ ./configure --with-libol=../libol-0.3.9 $ make

If you want to compile in TCP wrappers support, you can add the --enable-tcp-wrapper flag to the configure script. After syslog-ng is finished compiling, become root and run make install. This will install the syslog-ng binary and manpages. To configure the daemon, create the /usr/local/etc/syslog-ng directory and then create a syslog-ng.conf to put in it. To start off with, you can use one of the sample configuration files in the doc directory of the syslog-ng distribution.

There are five types of configuration file entries for syslog-ng, each of which begins with a specific keyword. The options entry allows you to tweak the behavior of the daemon, such as how often the daemon will sync the logs to the disk, whether the daemon will create directories automatically, and hostname expansion behavior. source entries tell syslog-ng where to collect log entries from. A source can include Unix sockets, TCP or UDP sockets, files, or pipes. destination entries allow you to specify possible places for syslog-ng to send logs to. You can specify files, pipes, Unix sockets, TCP or UDP sockets, TTYs, or programs. Sources and destinations are then combined with filters (using the filter keyword), which let you select syslog facilities and log levels. Finally, these are all used together in a log entry to define precisely where the information is logged. Thus you can arbitrarily combine any source, select what syslog facilities and levels you want from it, and then route it to any destination. This is what makes syslog-ng an incredibly powerful and flexible tool.

To set up syslog-ng on the remote end so that it can replace the syslogd on the system and send traffic to a remote syslog-ng, you'll first need to translate your syslog.conf to equivalent source, destination, and log entries.

Here's the syslog.conf for a FreeBSD system:

*.err;kern.debug;auth.notice;mail.crit          /dev/console *.notice;kern.debug;lpr.info;mail.crit;news.err /var/log/messages security.*                                      /var/log/security auth.info;authpriv.info                         /var/log/auth.log mail.info                                       /var/log/maillog lpr.info                                        /var/log/lpd-errs cron.*                                          /var/log/cron *.emerg                                         *

First you'll need to configure a source. Under FreeBSD, /dev/log is a link to /var/run/log. The following source entry tells syslog-ng to read entries from this file:

source src { unix-dgram("/var/run/log"); internal( ); };

If you were using Linux, you would specify unix-stream and /dev/log like this:

source src { unix-stream("/dev/log"); internal( ) };

The internal() entry is for messages generated by syslog-ng itself. Notice that you can include multiple sources in a source entry. Next, include destination entries for each of the actual log files:

destination console { file("/dev/console"); }; destination messages { file("/var/log/messages"); }; destination security { file("/var/log/security"); }; destination authlog { file("/var/log/auth.log"); }; destination maillog { file("/var/log/maillog"); }; destination lpd-errs { file("/var/log/lpd-errs"); }; destination cron { file("/var/log/cron"); }; destination slip { file("/var/log/slip.log"); }; destination ppp { file("/var/log/ppp.log"); }; destination allusers { usertty("*"); };

In addition to these destinations, you'll also want to specify one for remote logging to another syslog-ng process. This can be done with a line similar to this:

destination loghost { tcp("192.168.0.2" port(5140)); };

The port number can be any available TCP port.

Defining the filters is straightforward. You can simply create one for each syslog facility and log level, or you can create them according to those used in your syslog.conf. If you do the latter, you will only have to specify one filter in each log statement, but it will still take some work to create your filters.

Here are example filters for the syslog facilities:

filter f_auth { facility(auth); }; filter f_authpriv { facility(authpriv); }; filter f_console { facility(console); }; filter f_cron { facility(cron); }; filter f_daemon { facility(daemon); }; filter f_ftp { facility(ftp); }; filter f_kern { facility(kern); }; filter f_lpr { facility(lpr); }; filter f_mail { facility(mail); }; filter f_news { facility(news); }; filter f_security { facility(security); }; filter f_user { facility(user); }; filter f_uucp { facility(uucp); };

and examples for the log levels:

filter f_emerg { level(emerg); }; filter f_alert { level(alert..emerg); }; filter f_crit { level(crit..emerg); }; filter f_err { level(err..emerg); }; filter f_warning { level(warning..emerg); }; filter f_notice { level(notice..emerg); }; filter f_info { level(info..emerg); }; filter f_debug { level(debug..emerg); };

Now you can combine the source with the proper filter and destination within the log entries:

# *.err;kern.debug;auth.notice;mail.crit                /dev/console log { source(src); filter(f_err); destination(console); }; log { source(src); filter(f_kern); filter(f_debug); destination(console); }; log { source(src); filter(f_auth); filter(f_notice); destination(console); }; log { source(src); filter(f_mail); filter(f_crit); destination(console); }; # *.notice;kern.debug;lpr.info;mail.crit;news.err       /var/log/messages log { source(src); filter(f_notice); destination(messages); }; log { source(src); filter(f_kern); filter(f_debug); destination(messages); }; log { source(src); filter(f_lpr); filter(f_info); destination(messages); }; log { source(src); filter(f_mail); filter(f_crit); destination(messages); }; log { source(src); filter(f_news); filter(f_err); destination(messages); }; # security.*                                            /var/log/security log { source(src); filter(f_security); destination(security); }; # auth.info;authpriv.info                         /var/log/auth.log log { source(src); filter(f_auth); filter(f_info); destination(authlog); }; log { source(src); filter(f_authpriv); filter(f_info); destination(authlog); }; # mail.info                                             /var/log/maillog log { source(src); filter(f_mail); filter(f_info); destination(maillog); }; # lpr.info                                              /var/log/lpd-errs log { source(src); filter(f_lpr); filter(f_info); destination(lpd-errs); }; # cron.*                                                /var/log/cron log { source(src); filter(f_cron); destination(cron); }; # *.emerg                                               * log { source(src); filter(f_emerg); destination(allusers); };

You can set up the machine that will be receiving the logs in much the same way as if you were replacing the currently used syslogd.

To configure syslog-ng to receive messages from a remote host, you must specify a source entry:

source r_src { tcp(ip("192.168.0.2") port(5140)); };

Alternatively, you can dump all the logs from the remote machines into the same destinations that you use for your local log entries. This is not really recommended, because it can be a nightmare to manage, but can be done by including multiple source drivers in the source entry that you use for your local logs:

source src {      unix-dgram("/var/run/log");      tcp(ip("192.168.0.2") port(5140));     internal( ); };

Now logs gathered from remote hosts will appear in any of the destinations that were combined with this source.

If you would like all logs from remote hosts to go into a separate file named for each host in /var/log, you could use a destination like this:

destination r_all { file("/var/log/$HOST"); };

syslog-ng will expand the $HOST macro to the hostname of the system sending it logs and create a file named after it in /var/log. An appropriate log entry to use with this would be:

log { source(r_src); destination(r_all); };

However, an even better method is to recreate all of the remote syslog-ng log files on your central log server. For instance, a destination for a remote machine's messages file would look like this:

destination fbsd_messages { file("/var/log/$HOST/messages"); };

Notice here that the $HOST macro is used in place of a directory name. If you are using a destination entry like this, be sure to create the directory beforehand, or use the create_dirs() option:

options { create_dirs(yes); };

syslog-ng's macros are a very powerful feature. For instance, if you wanted to separate logs by hostname and day, you could use a destination like this:

destination fbsd_messages {     file("/var/log/$HOST/$YEAR.$MONTH.$DAY/messages");  };

You can combine the remote source with the appropriate destinations for the logs coming in from the network just as you did when configuring syslog-ng for local logging just specify the remote source with the proper destination and filters.

Another neat thing you can do with syslog-ng is collect logs from a number of remote hosts and then send all of those to yet another syslog-ng daemon. You can do this by combining a remote source and a remote destination with a log entry:

log { source(r_src); destination(loghost); };

Since syslog-ng is now using TCP ports, you can use any encrypting tunnel you like to secure the traffic between your syslog-ng daemons. You can use SSH port forwarding [Hack #72] or stunnel [Hack #76] to create an encrypted channel between each of your servers. By limiting connections on the listening port to include only localhost (using firewall rules, as in [Hack #33] or [Hack #34] ), you can eliminate the possibility of bogus log entries or denial-of-service attacks.

Server logs are among the most critical information that a system administrator needs to do her job. Using new tools and strong encryption, you can keep your valuable log data safe from prying eyes.



Network Security Hacks
Network Security Hacks: Tips & Tools for Protecting Your Privacy
ISBN: 0596527632
EAN: 2147483647
Year: 2006
Pages: 158

flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net