Command | Description |
---|
accept-lifetime start-time {infinite | end-time| duration seconds} | Specifies the time period during which the authentication key on a key chain is received as valid |
auto-summary | Toggles the automatic summarization of routes on network boundaries |
debug ip rip [events] | Enables the display of messages on RIP transactions |
debug ipv6 rip | Enables the display of RIPng transactions |
ip classless | Enables the forwarding of packets on the route for which the router can find the best match without consideration of the class of the destination address |
ip rip authentication key-chain name-of-chain | Enables RIPv2 authentication on an interface and specifies the name of the key chain to be used |
ip rip authentication mode {text | md5} | Specifies whether an interface will use clear text or MD5 authentication |
ip rip receive version [1] [2] | Specifies the version or versions of RIP messages that an interface will accept |
ip rip send version [1] [2] | Specifies the version or versions of RIP messages that an interface will send |
ip split-horizon | Toggles the split horizon function on an interface |
ip subnet-zero | Allows the use of all-zeros subnets for interface addresses and routing updates |
ipv6 rip process-name enable | Enables the IPv6 RIPng process with the given name on the interface on which this command is issued |
ipv6 rip process-name metric-offset value | Modifies the metric associated with an inbound interface |
ipv6 rip process-name summary-address prefix | Summarizes longer prefix length prefixes into shorter prefixes |
ipv6 router rip process-name | Enables the IPv6, RIPng process on a router, and enters the configuration mode to change global RIPng parameters |
port port-num multicast multicast-value | Changes the UDP port number and/or multicast address for a RIPng process |
key number | Specifies a key on a key chain |
key chain name-of-chain | Specifies a group of keys |
key-string text | Specifies the authentication string, or password, used by a key |
network network-number | Specifies the network address of one or more directly connected interfaces on which IGRP, EIGRP, or RIP processes should be enabled |
passive-interface type number | Disables the transmission of routing updates on an interface |
router rip | Enables the RIP routing process on a router |
send-lifetime start-time {infinite | end-time| duration seconds} | Specifies the time period during which the authentication key on a key chain may be sent |
show ip route [address [mask]] [protocol [process-ID]] | Displays the current routing table as a whole or by entry |
show ipv6 rip | Displays the RIPng protocol information |
show ipv6 route rip | Displays routes installed into the IPv6 route table from the RIPng process |
version | Specifies the version of the RIP routing process |