Question 1 | Which AVVID component is responsible for multicasting? |
A1: | Answer B is correct. Intelligent Network Solutions provides for services such as multicasting. Answer A defines hardware components and answer C includes storage and content networking, making them incorrect answers. Answer D is not a component of AVVID. |
Question 2 | Which layer provides filtering of traffic? A. Access B. Distribution C. Core D. Service Provider Edge
|
A2: | Answer B is correct. The distribution layer, part of Cisco's three-layer hierarchical design, provides Layer 3 services, including filtering of traffic. Answer A provides a user's access and answer C provides high-speed switching across the backbone, making them incorrect answers. Answer D is not part of the three-layer hierarchy. |
Question 3 | Which Enterprise Composite Network Model component terminates VPN connections and provides firewall functions? A. Enterprise Campus B. Service Provider Edge C. Distribution D. Enterprise Edge
|
A3: | Answer D is correct. The Enterprise Edge terminates VPNs and provides firewall functions. It connects to the remote sites via the Server Provider Edge, making answer B incorrect. The Enterprise Campus is the backbone of your campus, making answer A incorrect. Answer C is not part of the Enterprise Composite Network Model. |
Question 4 | When terminating a user's Ethernet connection to a punch-down block, you should not exceed ______ meters in the cable length. |
A4: | Answer A is correct. You should not exceed 5 meters from the user's Ethernet desktop connection to the punch-down block or outlet. You should not exceed 90 meters from the punch-down block to the wiring closet's patch panel, making answer D incorrect. In any situation, the total distance should not exceed 100 meters. Answers B and C don't have anything to do with the recommended distance limitations. |
Question 5 | In small campus networks, Cisco recommends the ________ switch at the Campus Core. A. 1900 B. 2950 C. 3550 D. 4006
|
A5: | Answer C is correct. Cisco recommends using the Catalyst 3550 for the Campus Core of small campus networks. The 1900 is EOL, making answer A incorrect. Answer B is used at the Building Access for small campus networks. Answer D is used in medium and large campus networks. |
Question 6 | What operating system mode is used to provide only Layer 2 functions on a Catalyst switch? A. Hybrid B. Native C. CatOS D. Layer-2 OS
|
A6: | Answer C is correct. The CatOS is used by the Supervisor Engine to provide Layer 2 processing. Native mode (IOS) handles both Layer 2 and Layer 3, making answer B incorrect. Hybrid mode is used to provide Layer 3 processing for Layer 3 cards in a Catalyst with a Supervisor Engine using CatOS, making answer C incorrect. Answer D is a nonexistent mode. |
Question 7 | What CatOS command is used to make configuration changes from Configuration mode? A. set B. configure terminal C. update D. None of these answers
|
A7: | Answer D is correct. The CatOS doesn't have a Configuration mode, but instead uses set commands in Privilege EXEC mode to make changes, making Answer A incorrect. Answer B is used on IOS switches to access Configuration mode. Answer C is a nonexistent command. |
Question 8 | Enter the switch configuration to restrict telnet access to the switch, allowing traffic only from 192.168.1.0/24. Also allow login access for telnets and assign a password of cisco: ________________________. |
A8: | Use this configuration: Switch(config)# access-list 1 permit 192.168.1.0 0.0.0.255 Switch(config)# line vty 0 4 Switch(config-line)# login Switch(config-line)# password cisco Switch(config-line)# access-class 1 in |
Question 9 | ________ management affects the backplane of the switch. A. Out-of-band B. Network-band C. Center-band D. In-band
|
A9: | Answer D is correct. In-band management traffic travels across the backplane of the switch. Answer A is via the console port and doesn't traverse the backplane of the switch, making it an incorrect answer. Answers B and C are not types of management access. |
Question 10 | Which of the following is false concerning the Switch Fabric Module? A. 256Gbps backplane capacity B. Goes into slots 1 and 2 of the 6500 Catalyst switch C. 30Mpps forwarding rate with CEF D. Supports up to two SFMs for redundancy
|
A10: | Answer B is correct. The SFM goes into slot 7 or 8 of a Catalyst 6513 and slot 5 or 6 of other 6500 switches. Answers A, C, and D are true, and therefore incorrect answers. |