Publicly Available Sources

Ahern 01 Ahern, Dennis; Clouse, Aaron; and Turner, Richard. CMMI Distilled: A Practical Introduction to Integrated Process Improvement. Boston: Addison-Wesley, 2001.

Bate 95 Bate, Roger; et al. Systems Engineering Capability Maturity Model, Version 1.1 (CMU/SEI-95-MM-003). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, November 1995.

Crosby 79 Crosby, P. B. Quality Is Free. New York: McGraw-Hill, 1979.

Curtis 01 Curtis, Bill; Hefley, William E.; and Miller, Sally. The People Capability Maturity Model. Boston: Addison-Wesley, 2001.

Deming 86 Deming, W. Edwards. Out of the Crisis. Cambridge, MA: MIT Center for Advanced Engineering, 1986.

DoD 91 Department of Defense. DoD Directive 5000.1: Defense Acquisition. Washington, DC, 1991.

DoD 96a Department of Defense. DoD Regulation 5000.2: Mandatory Procedures for Major Defense Acquisition Programs and Major Automated Information Systems. Washington, DC, 1996.

DoD 96b Department of Defense. DoD Guide to Integrated Product and Process Development (Version 1.0). Washington, DC: Office of the Under Secretary of Defense (Acquisition and Technology), February 5, 1996. <http://www.acq.osd.mil/te/survey/table_of_contents.html>

Dunaway 96 Dunaway, D.; and Masters, S. CMM-Based Appraisal for Internal Process Improvement (CBA IPI): Method Description (CMU/SEI-96-TR-007). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, April 1996 <http://www.sei.cmu.edu/publications/documents/96.reports/96.tr.007.html>

Dymond 95 Dymond, Kenneth M. A Guide to the CMM: Understanding the Capability Maturity Model for Software. Annapolis, MD: Process Inc., 1995.

EIA 94 Electronic Industries Alliance. EIA Interim Standard: Systems Engineering (EIA/IS-632). Washington, DC, 1994.

EIA 95 Electronic Industries Alliance. EIA Interim Standard: National Consensus Standard for Configuration Management (EIA/IS-649). Washington, DC, 1995.

EIA 98 Electronic Industries Alliance. Systems Engineering Capability Model (EIA/IS-731). Washington, DC, 1998. <http://geia.org/sstc/G47/731dwnld.htm>

FAA 97 Federal Aviation Administration. Integrated Capability Maturity Model, Version 1.0 (FAA-iCMM), November 1997. <http://www.faa.gov/aio/ProcessEngr/iCMM/index.htm>

Hefner 01 Hefner, Rick. CMMI Risk Management Requirements. Presentation at SEPG Conference, 2001.

Herbsleb 97 Herbsleb, James; Zubrow, David; Goldenson, Dennis; Hayes, Will; and Paulk, Mark. "Software Quality and the Capability Maturity Model." Communications of the ACM 40, 6 (June 1997): 30 40.

Humphrey 89 Humphrey, Watts S. Managing the Software Process. Reading, MA: Addison-Wesley, 1989.

IEEE 90 Institute of Electrical and Electronics Engineers. IEEE Standard Computer Dictionary: A Compilation of IEEE Standard Computer Glossaries. New York: IEEE, 1990.

INCOSE 96 International Council on Systems Engineering. Systems Engineering Capability Assessment Model, Version 1.50. Seattle, June 1996.

ISO 87 International Organization for Standardization. ISO 9000: International Standard. New York, 1987. <http://www.iso.ch/>

ISO 95 International Organization for Standardization and International Electrotechnical Commission. ISO/IEC TR 12207 Information Technology Software Life Cycle Processes, 1995. <http://www.iso.ch/>

ISO 98 International Organization for Standardization and International Electrotechnical Commission. ISO/IEC TR 15504 Information Technology Software Process Assessment, 1998. <http://www.iso.ch/>

ISO 00 International Organization for Standardization. ISO 9001, Quality Management Systems Requirements, 2000. <http://www.iso.ch/>

ISO 02 International Organization for Standardization and International Electro technical Commission. ISO/IEC 15939 Software Engineering Software Measurement Process, 2002. <http://www.iso.ch/>

Juran 88 Juran, J. M. Juran on Planning for Quality. New York: Macmillan, 1988.

Masters 95 Masters, S.; and Bothwell, C. CMM Appraisal Framework (CMU/SEI-95-TR-001). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, February 1995. <http://www.sei.cmu.edu/publications/documents/95.reports/95-tr-001/95-tr-001-abstract.html>

McGarry 00 McGarry, John; Card, David; Jones, Cheryl; Layman, Beth; Clark, Elizabeth; Dean, Joseph; and Hall, Fred. Practical Software Measurement: Objective Information for Decision Makers. Boston: Addison-Wesley, 2002.

SEI 95 Software Engineering Institute. The Capability Maturity Model: Guidelines for Improving the Software Process. Reading, MA: Addision-Wesley, 1995.

SEI 97a Integrated Product Development Capability Maturity Model, Draft Version 0.98. Pittsburgh, PA: Enterprise Process Improvement Collaboration and Software Engineering Institute, Carnegie Mellon University, July 1997. <ftp://ftp.sei.cmu.edu/pub/CMMI/ipd-cmm-draft/>

SEI 97b Software Engineering Institute. Software CMM, Version 2.0 (Draft C), October 22, 1997. <http://www.sei.cmu.edu/activities/cmm/draft-c/c.html>

SEI 99 Software Engineering Institute. CMMI A-Specification, Version 1.4, April 1999. <http://www.sei.cmu.edu/cmmi/org-docs/aspec1.4.html>

SEI 01a CMMI Product Development Team. ARC v1.1, Appraisal Requirements for CMMI, Version 1.1 (CMU/SEI-2001-TR-034, ESC-TR-2001-034). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, December 2001. <http://www.sei.cmu.edu/publications/documents/01.reports/01tr034.html>

SEI 01b CMMI Product Development Team. SCAMPI v1.1, Standard CMMI Appraisal Method for Process Improvement, Version 1.1: Method Definition Document (CMU/SEI-2001-HB-001). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, December 2001. <http://www.sei.cmu.edu/publications/documents/01.reports/01hb001.html>

SEI 01c Paulk, Mark; and Chrissis, Mary Beth. The 2001 High Maturity Workshop (CMU/SEI-2001-SR-014). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, January 2002. <http://www.sei.cmu.edu/publications/documents/01.reports/01sr014.html>

SEI 02a CMMI Product Development Team. CMMI for Systems Engineering/Software Engineering, Version 1.1 Staged Representation (CMU/SEI-2002-TR-002, ESC-TR-2002-002). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, January 2002. <http://www.sei.cmu.edu/publications/documents/02.reports/02tr002.html>

SEI 02b CMMI Product Development Team. CMMI for Systems Engineering/Software Engineering, Version 1.1 Continuous Representation (CMU/SEI-2002-TR-001, ESC-TR-2002-001). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, January 2002. <http://www.sei.cmu.edu/publications/documents/02.reports/02tr001.html>

SEI 02c CMMI Product Development Team. CMMI for Systems Engineering/Software Engineering/Integrated Product and Process Development, Version 1.1 Staged Representation (CMU/SEI-2002-TR-004, ESC-TR-2002-004). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, January 2002. <http://www.sei.cmu.edu/publications/documents/02.reports/02tr004.html>

SEI 02d CMMI Product Development Team. CMMI for Systems Engineering/Software Engineering/Integrated Product and Process Development, Version 1.1 Continuous Representation (CMU/SEI-2002-TR-003, ESC-TR-2002-003). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, January 2002. <http://www.sei.cmu.edu/publications/documents/02.reports/02tr003.html>

SEI 02e CMMI Product Development Team. CMMI for Systems Engineering/Software Engineering/Integrated Product and Process Development/Supplier Sourcing, Version 1.1 Staged Representation (CMU/SEI-2002-TR-012, ESC-TR-2002-012). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, March 2002. <http://www.sei.cmu.edu/publications/documents/02.reports/02tr012.html>

SEI 02f CMMI Product Development Team. CMMI for Systems Engineering/Software Engineering/Integrated Product and Process Development/Supplier Sourcing, Version 1.1 Continuous Representation (CMU/SEI-2002-TR-011, ESC-TR-2002-011). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, March 2002. <http://www.sei.cmu.edu/publications/documents/02.reports/02tr011.html>

SEI 02g Software Engineering Institute. The Measurement and Analysis Process Area in CMMI, 2002. <http://www.sei.cmu.edu/cmmi/publications/meas-anal-cmmi.html>

SEI 02h Software Engineering Institute. Software Acquisition Capability Maturity Model (SA-CMM) Version 1.03 (CMU/SEI-2002-TR-010, ESC-TR-2002-010). Pittsburgh, PA: Software Engineering Institute, Carnegie Mellon University, March 2002. <http://www.sei.cmu.edu/publications/documents/02.reports/02tr010.html>

Shewhart 31 Shewhart, Walter A. Economic Control of Quality of Manufactured Product. New York: Van Nostrand, 1931.

SPMN 97 Software Program Managers Network. Program Managers Guide to Software Acquisition Best Practices, Version 2.31, 1998. <http://www.spmn.com/products_guidebooks.html>