8.2 The Extensible Authentication Protocol

EAP is an extension to the PPP protocol that enables a variety of authentication protocols to be used. EAP is not tightly bound to the security method. It passes through the exchange of authentication messages, allowing the authentication software stored in a server to interact with its counterpart in the client. EAP serves as a sort of replacement protocol, allowing the initial negotiation of an authentication protocol (such as CHAP and MS-CHAP Versions 1 and 2) and then the agreement on both ends of the connection on a link type, which is a specific EAP-authentication scheme. Once these two elements have been confirmed, EAP allows for an open -ended conversation between a RADIUS server and its client.

EAP is designed to function as an authentication "plug-in," with libraries on both the client and the server end of a PPP connection. Each authentication scheme is associated with a particular library file, and once a specific library has been dropped into place on both ends, that new scheme can be used. Thus, the protocol can easily be functionally extended by vendors at any time without having to redesign the whole protocol. EAP currently supports authentication schemes such as Generic Token Card, OTP, MD5-Challenge, and Transport Level Security (TLS) for use in smart-card applications and support for certificates. In addition to supporting PPP, EAP is also supported in the link layer as specified in IEEE 802. IEEE 802.1x defines EAP's use in authenticating 802 devices, like WiFi access points and Ethernet switches.

How does EAP relate to RADIUS? EAP secures RADIUS more. Using RADIUS with EAP is not an official authentication scheme of EAP; rather, look at it as the passing of EAP messages of any EAP type by the RADIUS client gear and the RADIUS server. EAP over RADIUS is typically set up in this fashion: the access server is configured to use EAP and also to use RADIUS as its authentication provider. When a service consumer attempts to connect, the service consumer negotiates the use of EAP with the RADIUS client gear. The end user then sends an EAP message to the RADIUS client, and the RADIUS client encapsulates the EAP message as a RADIUS message and sends it to the RADIUS server. The RADIUS server acts on the encapsulated message and sends a RADIUS-style message back to the RADIUS client. The RADIUS client then constructs an EAP message from the RADIUS message and sends it back to the service consumer/end user . Figure 8-1 illustrates this flow.

Figure 8-1. EAP and RADIUS working together